Biomedical Engineering Reference
In-Depth Information
isostatically hot pressed composites of Al
2
O
3
and Y
2
O
3
-partially stabilized
ZrO
2
', J. Am. Ceram. Soc., 68, C4-C5.
Tsukuma, K., Takahata, T. and Shiomi, M. (1988), in Advances in Ceramics, Vol. 24,
Science and Technology of Zirconia III, American Ceramic Society, Westerville,
OH, 721-728.
Tuan, W. H. and Brook, R. J. (1992), 'Processing of alumina/nickel composites', J.
Eur. Ceram. Soc., 10, 95-100.
Uchiyama, T., Niihara, K. and Hirai, T. (1986), J. Yogvo Kyokaishi, 94, 756.
Uchiyama, T., Inoue, S. and Niihara, K. (1989), in Somiya, S. and Inomata, K. (eds)
Silicon Carbide Ceramics, Rokakuho, Uchida, Tokyo, 193-200.
Uno, T., Kasuga, T., Nakayama, S. and Tsutsumi, S. (1991), 'High-strength calcium-
mica containing glass-ceramics', in Sakka, S. and Soga, N. (eds) Proceedings of
International Conference on Science & Technology of New Glasses, Ceramic
Society of Japan, Tokyo, 335-340.
Uno, T., Kasuga, T., Nakayama, S. and Ikushima, A. J. (1992), 'Nanocomposite
machinable glass-ceramics', in Proceedings of 16th International Glass Congress,
Vol. 4, Madrid, 73-78.
Vanmeensel, K., Anne, G., Jiang, D., Vleugels, J. and Van Der Biest, O. (2004),
'Homogeneous and functionally graded Si
3
N
4
-TiCN composites shaped by
electrophoretic deposition', Silic. Indust., Special Issue, 69(7-8), 233-239.
Vaughan, D. A. J., Guiu, F. and Dalmau, M. R. (1987), 'Indentation fatigue of
alumina', J. Mater. Sci. Lett., 6, 689-691.
Veltri, R. D. and Galasso, F. S. (1990), 'Chemical-vapor-infiltrated silicon nitride,
boron nitride and silicon carbide matrix composites', J. Am. Ceram. Soc., 73(7),
2137-2140.
Venkatachari, K. R. and Raj, R. (1987), 'Enhancement of strength through sinter
forging', J. Am. Ceram. Soc., 70, 514-520.
Venkateswaran, T., Sarkar, D. and Basu, B. (2005), 'Tribological properties of WC-
ZrO
2
nanocomposites', J. Am. Ceram. Soc., 88(3), 691-707.
Wahi, R. P. and Ilschner, B. (1980), 'Fracture behaviour of composites based on
Al
2
O
3
-TiC', J. Mater. Sci., 15, 875-885.
Wakai, F., Sakaguchi, S. and Matsuno, Y. (1986), 'Superplasticity of yttria-
stabilized tetragonal ZrO
2
polycrystals', Adv. Ceram. Mater., 1, 259-263.
Wakai, F., Kodama, Y., Sakaguti, S., Murayama, N., Izaki, K. and Niihara, K.
(1990), 'A superplastic covalent crystal composite', Nature, 344, 421-423.
Wakai, F., Nagano, T. and Iga, T. (1997), 'Hardening in creep of alumina by
zirconium segregation at the grain boundary', J. Am. Ceram. Soc., 80, 2361-
2366.
Wakai, F., Kondo, N and Shinoda, Y. (1999), 'Ceramics superplasticity', Curr. Opin.
Sol. Sta. Mater. Sci., 4, 461-465.
Wang, C. M., Mitomo, M. and Emoto, H. (1997), 'Microstructure of liquid phase
sintered superplastic silicon carbide ceramics', J. Mater. Res., 12, 3266-3270.
Wang, H. and Singh, R. N. (1994), 'Thermal shock behaviour of ceramics and
ceramic composites', Int. Mater. Rev., 39(6), 228-244.
Wang, J., Taleff, E. M. and Kovar, D. (2003), 'High-temperature deformation of
Al
2
O
3
/Y-TZP particulate composites', Acta Mater., 51, 3571-3583.
Wang, J. G. and Raj, R. (1984), 'Mechanism of superplastic flow in a fine-grained
ceramic containing some liquid-phase', J. Am. Ceram. Soc., 67, 399-409.
