Biomedical Engineering Reference
In-Depth Information
Holand, W., Vogel, W., Mortiere, W. J., Duvigneaud, P. H., Naessens, G. and
Plumat, E. (1983),
'A new type of phlogopite crystal
in machinable glass-
ceramics', Glass Technol., 24, 318-322.
Holmes, J. W. and Cho, C. (1992), 'Experimental observations of frictional heating
in fibre-reinforced ceramics', J. Am. Ceram. Soc., 75(4), 929-938.
Homeney, J., Vaughn, W. L. and Ferber, M. K. (1987), 'Processing and mechanical
properties of SiC-whisker-Al
2
O
3
matrix composites', J. Am. Ceram. Soc. Bull.,
66, 333-338.
Hwang, S. L. and Chen, I. W. (1994), 'Reaction hot pressing of
α
and
β
SiAlON
ceramics', J. Am. Ceram. Soc., 77, 165-171.
Imasato, S., Tokumoto, K., Kitada, T. and Sakaguchi, S. (1995), 'Properties of ultra
fine grain binderless cemented carbide RCCFN', Int. J. Ref. Met. Hard Mater.,
13, 305-312.
Ionescu, E., Papendorf, B., Kleebe, H. J. and Riedel, R. (2010), 'Polymer-derived
silicon oxycarbide/hafnia ceramic nanocomposites, part ii: stability toward
decomposition and microstructure evolution at T
>>
1000
o
C', J. Am. Ceram.
Soc., 93, 1774-1782.
Izaki, K., Hakkei, K., Ando, K. and Niihara, K. (1980), in Mackenzie, J. M. and D.
R. Ulrich (eds) Ultrastructure Processing of Advanced Ceramics, John Wiley &
Sons, New York, 891-900.
Izaki, K., Nakahira, A. and Niihara, K. (1991), J. Japan Soc. Powder Powder
Metall., 38, 357-361.
Jenkins, M. G., Salem, J. A. and Seshadri, S. G. (1989), 'Fracture of a TiB
2
particle/
SiC matrix composite at elevated temperature', J. Comp. Mater., 23, 77-90.
Jeong, Y. K. and Niihara, K. (1997), 'Microstructure and mechanical properties of
pressureless-sintered of Al
2
O
3
-SiC nanocomposites', J. Nanostruct. Mater.,9,
193-196.
Jero, P. D., Parthasarathy, T. A. and Kerans, R. J. (1992), 'Measurement of interface
properties from push-out tests', Ceram. Eng. Sci. Proc., 13(7-8), 54-63.
Jhao, J., Stearns, L. C., Harmer, M. P., Chan, H. M., Miller, G. A. and Cook, R. F.
(1993), 'Mechanical behavior of alumina-silicon carbide nanocomposites', J.
Am. Ceram. Soc., 76(2), 503-510.
Ji, Y. and Yeomans, J. A. (2002), 'Processing and mechanical properties of Al
2
O
3
-
5vol% Cr nanocomposites', J. Eur. Ceram. Soc., 22(12), 1905-2080.
Jia, K., Fischer, B. and Gallios, T. (1998), 'Microstructure, hardness and toughness
of nanostructured and conventional Wc-Co composites', J. Nanostruct. Mater.,
10(5), 875-891.
Jimenez-Melendo, M., Dominguez-Rodriguez, A. and Bravo-Leon, A. (1998),
'Superplastic flow in fine-grained yttria-stabilized zirconium polycrystals:
constitutive equation and deformation mechanisms', J. Am. Ceram. Soc., 81,
2761-2776.
Jones, R. H., Giancarlie, L., Hasegawa, A., Katoh, Y., Kohyama, A., Riccardi, B.,
Snead, L. L. and Weber, W. J. (2002), 'Promise and challenges of SiCf/SiC
composites for fusion energy applications', J. Nucl. Mater., 307-311, 1057-
1072.
Kastritseas, C., Smith, P. and Yeomans, J. (2006), 'Thermal shock of ceramic matrix
composites', in Low, I. M. (ed.) Ceramic Matrix Composites, Microstructure,
Properties and Applications, Woodhead Publishing, Cambridge, 400-433.
