Biomedical Engineering Reference
In-Depth Information
Dalgleish, B. J., Pratt, P. L., Rawlings, R. D. and Fakhr, A. (1980), Mater. Sci. Eng.,
45, 9.
Davidge, R. W. (1979), Mechanical Behavior of Ceramics, Cambridge University
Press, Cambridge.
Davidge, R. W., Brook, R. J., Cambier, F., Poorteman, M., Leriche, A., Sullivan, D.
O., Hampshire, S. and Kennedy, T. (1997), 'Fabrication, properties, and
modelling of engineering ceramics reinforced with nanoparticles of silicon
carbide', Br. Ceram. Trans., 96(3), 121-127.
De, A., Phani, K. K. and Kumar, S. (1987), 'Acousto-ultrasonic study on glass-
ceramics in the system MgO-Al
2
O
3
-SiO
2
', J. Mater. Sci. Lett., 6, 17-19.
Evans, A. G. and Blumenthal, W. (1983), in Bradt, R. C., Evans, A. G., Hasselman,
D. P. H. and Lange, F. F. (eds) Fracture Mechanics of Ceramics, Vol. 5, Plenum,
New York, 423-448.
Ferroni, L. P. and Pezzotti, G. (2002), 'Evidence for bulk residual stress
strengthening in alumina/SiC nanocomposites', J. Am. Ceram. Soc., 85(8),
2033-2038.
Folsom, C. A., Lee, S. S. and Zawada, L. P. (unpublished) The intermediate
temperature embrittlement phenomenon in a Nicalon-fibre-reinforced ceramic
matrix composite with boron containing compounds.
Gao, L., Jin, X. H. and Zheng, S. (2004), Ceramic Nanocomposites, Chemical
Engineering Publishers, Beijing.
Garvie, R., Hannink, H. and Pascoe, R. T. (1975), 'Ceramic steel', Nature, 258, 703-
708.
Gerdes, T. and Willert-Porada, M. (1994), 'Microwave sintering of metal-ceramic
and ceramic-ceramic composites', Mater. Res. Soc. Symp., 347, 531.
Greskovich, C. and Palm, J. A. (1980), Observations on the fracture toughness of
β
-
Si
3
N
4
-
β
-SiC composites', J. Am. Ceram. Soc., 63, 597-599.
Grossman, D. G. (1972), 'machinable glass-ceramics based on tetrasilicic mica', J.
Am. Ceram. Soc., 55, 446-449.
Gupta, T. K., Lange, F. F. and Bechtold, J. H. (1978), 'Effect of stress-induced phase
transformation on the properties of polycrystalline zirconia containing
metastable tetragonal phase', J. Mater. Sci., 13, 1464-1470.
Hanigofsky, J. A., More, K. L., Lackey, W. J., Lee, W. Y. and Freeman, G. B.
(1991), 'Composition and microstructure of chemically vapor-deposited-boron
nitride, aluminum nitride and boron nitride + aluminum nitride composites', J.
Am. Ceram. Soc., 74(2), 301-305.
Hannink, R. H. J., Kelly, P. M. and Muddle, B. C. (2000), 'Transformation
toughening in zirconia-containing ceramics', J. Am. Ceram. Soc., 83, 461-487.
Hansson, T., Warren, R. and Wasen, J. (1993), 'Fracture toughness anisotropy and
toughening mechanisms of a hot-pressed alumina reinforced with silicon carbide
whiskers', J. Am. Ceram. Soc., 76(4), 841-848.
Hartman, G. A. and Ashbaugh, N. E. (1990), 'A fracture mechanics test automation
system for a basic research laboratory', in ASTM Special Technical Publication
1092, American Society for Testing and Materials, Philadelphia, PA, 95-110
Hing, P. (1980), J. Sci. Ceram., 10, 521.
Hoffman, M., Rodel, J., Sternitzke, M. et al. (1996), 'Fracture toughness and
subcritical crack growth in alumina/silicon carbide 'nanocomposites', Frac.
Mech. Ceram., 12, 179.
