Biomedical Engineering Reference
In-Depth Information
focused on the development of new biomaterials in the following areas (Best
et al., 2008):
the development of smart materials capable of combining sensing with
bioactivity
.
the development of improved biomimetic composites
.
enhanced bioactivity in terms of gene activation.
.
16.6 References
Akao M, Aoki H and Kato K (1981), 'Mechanical properties of sintered
hydroxyapatite for prosthetic applications', J Mater Sci, 16, 809-812.
Ban J (2008), 'Reliability and properties of core materials for all-ceramic dental
restorations', Jap Dent Sci Rev, 44, 3-21.
Benzaid R, Chevalier J, Saaˆ daoui M, Fantozzi G, Nawa M, Diaz L A and
Torrecillas R (2008), 'Fracture toughness, strength and slow crack growth in a
ceria stabilized zirconia-alumina nanocomposite for medical applications',
Biomaterials, 29, 3636-3641.
Best S M, Porter A E, Thian E S and Huang J (2008), 'Bioceramics: Past, present and
for the future', J Eur Ceram Soc, 28, 1319-1327.
Cales B (2000), 'Fractures des teˆ tes de prothe` ses de hanche en zircone', Maitr Orthop,
96, 26-30.
Chevalier J (2006), 'What future for zirconia as a biomaterial?', Biomaterials, 27,
535-543.
Chevalier J and Gremillard L (2009), 'Ceramics for medical applications: A picture
for the next 20 years', J Eur Ceram Soc, 29, 1245-1255.
Chevalier J, De Aza A, Schehl M, Torrecillas R and Fantozzi G (2000), 'Extending
the lifetime of ceramic orthopaedic implants', Adv Mater, 12, 1619-1621.
Chevalier J, Taddei P, Gremillard L, Deville S, Fantozzi G, Bartolome´ JF,
Pecharroman C, Moya J S, Diaz L A, Torrecillas R and Affatato S (2011),
'Reliability assessment in advanced nanocomposite materials for orthopaedic
applications', J Mech Behavior Biom Mat, 4, 303-314.
Cima L G, Vacanti J P, Vacanti C, Ingber D, Mooney D and Langer R (1991),
'Tissue engineering by cell transplantation using degradable polymer
substrates', J Biomech Eng, 113, 143-151.
Clarke I C, Manaka M, Green D D, Williams P, Pezzoti G, Kim Y H, Ries M,
Sugano N, Sedel L, Delauney C, Ben Nissan B, Donaldson T and Gustafson G
A (2003), 'Current status of zirconia used in total hip implants', J Bone Joint
Surg Am, 85, 73-84.
De Aza A H, Chevalier J, Fantozzi G, Schehl M and Torrecillas R (2002), 'Crack
growth resistance of alumina, zirconia and zirconia toughened alumina ceramics
for joint prosthesis', Biomaterials, 23, 937-945.
Denry I and Holloway J A (2010), 'Ceramics for dental applications: A review',
Materials, 3, 351-368.
Dewith G, van Dijk H J A, Hattu N and Prijs K (1981), 'Preparation, microstructure
and mechanical properties of dense polycrystalline hydroxyapatite', J Mater
Sci, 6, 1592-1598.
Du C, Cui F Z, Zhu X D and de Groot K (1999), 'Three-dimensional nano-HAp/
