Biomedical Engineering Reference
In-Depth Information
synthesis of Cu-Al/Al
2
O
3
composite in CuO-Al system under different
conditions', Chem for Sustainable Development, 15, 255-8.
Wieczorek-Ciurowa K, Oleszak D and Gamrat K (2007b), 'Mechanosynthesis and
process characterization of some nanostructured intermetallics-ceramics
composites', J Alloys Comp, 434-5, 501-4.
Wieczorek-Ciurowa K, Oleszak D and Gamrat K (2008), 'Cu-Al/Al
2
O
3
cermet
synthesized by reactive ball milling of CuOAl system', Rev Adv Mater Sci, 18,
248-52.
Yakowitz H (1975), 'Methods of quantitative X-ray analysis used in electron probe
microanalysis and scanning electron microscopy', In: Practical Scanning
Electron Microscopy, Goldstein J I and Yakowitz H (eds), Plenum Press, New
York.
Yang H and McCormick P G (1993), 'Combustion reaction of zinc oxide with
magnesium during milling', J Solid State Chem, 107, 258-63.
Ying D Y and Zhang D L (2000a), 'Processing of Cu-Al
2
O
3
metal matrix
nanocomposite materials by using high energy ball milling', Mater Sci Eng,
A286, 152-6.
Ying D Y and Zhang D L (2000b), 'Solid-state reactions between Cu and Al during
mechanical alloying and heat treatment'. J Alloys Comp, 311, 275-82.
Ying D Y and Zhang D L (2003), 'Solid state reactions between CuO and Cu(Al) or
Cu
9
Al
4
in mechanically milled composite powders', Mater Sci Eng, A361, 321-
30.
Zhang F, Kaczmarek W A, Lu L and Lai M O (2000), 'Formation of Al-TiN metal
matrix composite via mechanochemical route', Scripta Mater, 43, 1097-102.
