Biomedical Engineering Reference
In-Depth Information
12.10 References
Agrawal P and Sun C T (2004), 'Fracture in metal-ceramic composites', Comp Sci
Technol, 64, 1167-78.
Avvakumov E G, Senna M and Kosova N (2001), Soft Mechanochemical Synthesis,
A Basis for New Chemical Technologies, Kluwer Academic Publishers, Boston.
Bala´ zˇ P (2008), Mechanochemistry in Nanoscience and Minerals Engineering,
Springer, Berlin.
Barin I, Knacke O and Kubaschewski O (1977), Thermochemical Properties of
Inorganic Substances, Supplement, Springer, Berlin.
Bobrova E and Besterci M (1994), 'Processing of Cu-Al
2
O
3
metal matrix
nanocomposite materials by high-energy ball milling', Powder Metall Sci
Tech, 6,7.
Boldyrev V V (2006), 'Mechanochemistry and mechanical activation of solids',
Russian Chem Rev, 75 (3), 177-89.
Boldyrev V V, Pavlov S V and Goldberg E L (1996), 'Interrelation between fine
grinding and mechanical activation', Int J Mineral Process, 44-5, 181-5.
Botta P M, Aglietti E F and Porto Lopez J M (2000), 'Thermal and phase evolution
of mechanochemical reactions in the Al-Fe
3
O
4
system', Thermochim Acta, 363,
143-7.
Butyagin P YU (2000), 'Mechanochemical synthesis: mechanical and chemical
factors', J Mater Synth Process, 8 (3/4), 205-11.
Butyagin P YU (2003), 'Diffusion and deformation models of mechanochemical
synthesis', Colloid J, 65 (5), 648-51.
Chang S T, Tuan W H, You H C and Lin I C (1999), 'Effect of surface grinding on
the strength of NiAl and Al
2
O
3
/NiAl composites', Mater Chem Phys, 59, 220-4.
Chen Y, Hwang T, Marsh M and Williams J S (1997), 'Study on mechanism of
mechanical activation', Mater Sci Eng, A226-8, 95-8.
Courtney T H (1994), 'Modelling of mechanical milling and mechanical alloying',
Rev in Particulate Mater, 2, 63-116.
Ferna´ ndez-Bertran J F (1999), 'Mechanochemistry: an overview', Pure Appl Chem,
71 (4), 581-6.
Grahle P and Arzt E (1997),
'Microstructural development
in dispersion
strengthened NiAl produced by mechanical
alloying
and secondary
recrystallization', Acta Mater, 45, 201-11.
Hansen H (1958), Constitution of Binary Alloys, McGraw-Hill, New York.
Heegn H, Birkeneder F and Kmptner A (2003), 'Mechanical activation of precursors
for nanocrystalline materials', Cryst Res Technol, 38 (1), 7-20.
http://www.fritsch.com Laboratory planetary mill Pulverisette 6 (Fritsch GmbH,
Germany).
Hwang S J and Lee J-H (2005), 'Mechanochemical synthesis of Cu-Al
2
O
3
nanocomposites', Mater Sci Eng, A405, 140-6.
Ivanov E and Suryanarayana C (2000), 'Materials and process design through
mechanochemical routes', J Mater Synth Process, 8 (3/4), 235-44.
Kaczmar J W (2000), 'Production and application of metal matrix composite
materials', J Mater Process Technol, 106, 58-67.
Kelsall R W, Hamley J W and Geoghegan M (eds) (2005), Nanoscale Science and
Technology, J Wiley & Sons, New York.
