Biomedical Engineering Reference
In-Depth Information
(2009), 'Hot pressed and spark plasma sintered zirconia/carbon nanofiber
composites', J Eur Ceram Soc, 29, 3177-3184.
Duszova´ A, Dusza J, Toma´ sˇ ek K, Blugan G and Kuebler J (2008), 'Microstructure
and properties of carbon nanotube/zirconia composite', J Europ Ceram Soc, 28,
1023-1027.
EN 843-5: (2006), Advanced technical ceramics - Mechanical properties of
monolithic ceramics at room temperature - Part 5: Statistical analysis.
Evans A G and Cannon R M (1986), 'Toughening of brittle solids by martensitic
transformations', Acta Met, 34, 761-800.
Hsueh C-H and Becher P F (1988), 'Evaluation of bridging stress from R-curve
behavior for nontransforming ceramics', J Am Ceram Soc, 71, C234-C237.
Hvizdosˇ P, Kupkova´ M, Rudnayova´ E and Dusza J (1994), 'Rising fracture
resistance of Al
2
O
3
and Al
2
O
3
+SiC whisker ceramics', CFI - Berichte der DKG,
9, 55-64.
Hvizdosˇ P, Puchy´ V, Duszova´ A and Dusza J (2010), 'Tribological behavior of
carbon nanofiber-zirconia composite', Scripta Mat, 63, 254-257.
Hvizdosˇ P, Duszova´ A, Puchy´ V, Tapaszto´ O, Kun P, Dusza J and Bala´ zsi C (2011),
'Wear behavior of ZrO
2
-CNF and Si
3
N
4
-CNT nanocomposites', Key Eng Mat,
465, 495-498.
Iijima S (1991), 'Helical microtubules of graphitic carbon', Nature, 354, 56-58.
Kun P, Tapaszto´ O, We´ ber F and Bala´ zsi C (2011), 'Determination of structural and
mechanical properties of multilayer graphene added silicon nitride-based
composites', Ceram Int, in press; doi:10.1016/j.ceramint.2011.06.051.
Niihara K, Nakahira A and Sekino T (1993), 'New nanocomposite structural
ceramics', Mat Res Soc Symp Proc, 286, 405-412.
Lange F F (1989),
'Powder processing science and technology of
increased
reliability', J Am Ceram Soc, 72, 3-15.
Lim D S, You D H, Choi H-J, Lim S H and Jang H (2005), 'Effect of CNT
distribution on tribological behavior of aluminum-CNT composites', Wear,
259, 539-544.
Lugovy M, Orlovskaya N, Berroth K and Kuebler J (1999), 'Macrostructural
engineering of ceramic-matrix layered composites', Compos Sci Technol, 59,
1429-1437.
Ohji T, Jeong Y K, Choa Y H and Niihara K (1998), 'Strengthening and toughening
mechanisms of ceramic nanocomposites', J Am Ceram Soc, 81, 1453-1460.
Orowan E (1949), 'Fracture and strength of solids', Rep Prog Phys, 12, 185.
Puchy´ V, Dusza J, Hvizdosˇ P, Inam F and Reece M J (2011), 'Mechanical and
electrical properties of Al
2
O
3
-CNT nanocomposites', Chem. Papers, 105, 635-
637.
Ro¨ del J, Kelly J F and Lawn B R (1990), 'In-situ measurements of bridged crack
interfaces in the scanning electron microscope', J Am Ceram Soc, 73, 3313-
3318.
Selsing J (1961), 'Internal stresses in ceramics', J Am Ceram Soc, 44, 419.
Skopp A, Woydt M and Habig H (1995), 'Tribological behavior of silicon nitride
materials under unlubricated sliding between 22
8
8
C and 1000
C', Wear, 181-183,
571.
Sternitzke M (1997), 'Structural ceramic nanocomposites', J Eur Ceram Soc, 17,
1061-1082.
