Biomedical Engineering Reference
In-Depth Information
[60] A. Inspector, C.E. Bauer, E.J. Oles, Superhard coatings for metal cutting applications, Surf. Coat. Technol.
68/69 (1994) 359.
[61] A. Inspector, E.J. Oles, C.E. Bauer, Theory and practice of diamond coated cutting tools, metal hard materi-
als, Int. J. Refract. 15 (1997) 49.
[62] K. Kanda, S. Takehana, S. Yoshida, R. Watanabe, S. Takano, H. Ando, et al., Application of diamond-coated
cuttings tools, Surf. Coat. Technol. 73 (1995) 115.
[63] S. Amirhaghi, H.S. Reehal, R.J.K. Wood, D.W. Wheeler, Diamond coatings on tungsten carbide and their
erosive wear properties, Surf. Coat. Technol. 135 (2001) 126.
[64] H. Sein, W. Ahmed, M.J. Jackson, N. Ali, J. Gracio, Stress distribution in diamond films grown on
cemented WC-Co dental burs using modified hot-filament CVD, Surf. Coat. Technol. 163-164 (2003) 196.
[65] A. Gicquel, E. Anger, M.F. Ravet, D. Fabre, G. Scatena, Z.Z. Wang, Diamond deposition in a bell-jar reac-
tor: influence of the plasma and substrate parameters on the microstructure and growth rate, Diam. Relat.
Mater. 2 (1993) 417-424.
[66] M.C. Polo, W. Wang, G. Sanshez, J. Andujar, J. Esteve, Nucleation and initial growth of bias-assisted
HFCVD diamond on boron nitride films, Diam. Relat. Mater. 6 (1997) 579.
[67] C.F.M. Borges, P. Mange, M. Dent, E. Pfender, D. Ring, J. Heberlein, Dental diamond burs made with a
new technology, J. Prosthet. Dent. (1999) 73-79.
[68] S. Kamiya, H. Takahashi, R. Polini, E. Traversa, Quantitative determination of the adhesive fracture tough-
ness of CVD diamond to WC-Co cemented carbide, Diam. Relat. Mater. 9 (2000) 191-194.
[69] H. Sein, W. Ahmed, M. Jackson, R. Polini, I.U. Hassan, M. Amar, et al., Enhancing nucleation density and
adhesion of polycrystalline diamond films deposited by HFCVD using surface treatments on co-cemented
tungsten carbide, Diam. Relat. Mater. 13 (4-8) (2004) 601.
[70] H. Sein, W. Ahmed, M. Jackson, R. Woodwards, R. Polini, Performance and characterisation of CVD dia-
mond coated, sintered diamond and WC-co cutting tools for dental and micromachining applications, Thin
Solid. Films 447-448 (2004) 455.
[71] A.N. Jones, W. Ahmed, I.U. Hassan, H. Sein, C.A. Rego, Pulsed biased growth of nanocrystalline diamond
by HFCVD, Surf. Eng. 20 (3) (2004) 1.
[72] N. Ali, G. Cabral, V.F. Neto, H. Sein, W. Ahmed, J. Gracio, Surface engineering of WC-Co used in dental
tools technology, J. Mater. Sci. Technol. 19 (2003) 1273-1278.
[73] R. Polini, F. Casadei, P. D'Antonio, E. Traversa, Dry turning of alumina/aluminum composites with CVD
diamond coated Co-cemented tungsten carbide tools, Surf. Coat. Technol. 166 (2003) 127-134.
[74] H. Sein, W. Ahmed, N. Ali, J. Gracio, R. Woodwards, Diamond films grown on cemented WC-Co dental
burs using an improved CVD method, Diam. Relat. Mater. 12 (8) (2003) 1300.
[75] W. Ahmed, H. Sein, H. Rajab, M. Jackson, Chemical vapor deposition of diamond coatings onto dental
burrs, J. Chem. Educ. 80 (6) (2003) 636.
[76] H. Sein, W. Ahmed, C.A. Rego, A.N. Jones, M. Amar, M. Jackson, et al., Chemical vapour deposition dia-
mond coating on tungsten carbide dental cutting tools, J. Phys. Condes. Matter. 15 (2003) S2961.
[77] A.N. Jones, W. Ahmed, I.U. Hassan, C.A. Rego, H. Sein, M. Amar, et al., The impact of inert gases on the
structure, properties and growth of nanocrystalline diamond, J. Phys. Condes. Matter. 15 (2003) S2969.
[78] H. Sein, W. Ahmed, M. Jackson, N. Ali, J. Gracio, Stress distribution in diamond films grown on cemented
WC-Co dental burs using modified hot-filament CVD, Surf. Coating. Tech. 163-164 (2003) 196.
[79] M. Amar, W. Ahmed, H. Sein, A.N. Jones, C.A. Rego, Chemical vapour deposition of diamond coatings
onto molybdenum dental tools, J. Phys. Condes. Matter. 15 (2003) S2977.
[80] H. Sein, W. Ahmed, I.U. Hassan, N. Ali, J. Gracio, M.J. Jackson, Chemical vapour deposition of microdrill
cutting edges for micro-and nanotechnology applications, J. Mater. Sci. 37 (2002) 5057.
[81] H. Sein, W. Ahmed, C.A. Rego, Application of diamond coatings onto small dental tools, Diam. Relat.
Mater. 11 (3-6) (2002) 731.
[82] H. Sein, M. Jackson, W. Ahmed, C.A. Rego, Deposition of diamond coatings to micro-machining cutting
tools, New Diam. Front. Technol. 12 (2002) 381-390.
