Biomedical Engineering Reference
In-Depth Information
[26] C.J. Brinker, G.W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, Academic
Press, New York, 1990.
[27] C. Gabbi, A. Cacchioli, B. Locardi, F. Guadagninno, Bioactive glass coating: physicochemical aspect and
biological finding, Biomaterials 16 (7) (1995) 515.
[28] J.P. Borrajo, J. Serra, P. González, B León, F.M. Muñoz, M. López, In vivo evaluation of titanium
implants coated with bioactive glass by pulsed laser deposition, J. Mater. Sci. Mater. Med. 18 (12) (2007)
2371.
[29] A. Martínez, I. Izquierdo-Barba, M. Vallet-Regí, Bioactivity of a CaO-SiO
2
binary glass system, Chem.
Mater. 12 (10) (2000) 3080.
[30] I. Izquierdo-Barba, A. Asenjo, L. Esquivias, M. Vallet-Regí, SiO
2
-CaO vitrous films deposited onto
Ti6Al4V substrates, Eur. J. Inorg. Chem. 2003 (8) (2003) 1608.
[31] I. Izquierdo-Barba, M. Vallet-Regí, J.M. Rojo, E. Blanco, L. Esquivias, The role of precursor concentration
on the characteristics of SiO
2
CaO films, J. Sol-Gel Sci. Tech. 26 (1-3) (2003) 1179.
[32] J. Livage, Sol-gel processing of metal oxides, Chem. Scripta. 28 (1988) 9.
[33] B. Surowska, J. Bienia, M. Walczak, K. Sangwal, A. Stoch, Microstructure and mechanical properties of
ceramic coatings on Ti and Ti-based alloy, Appl. Surf. Sci. 238 (2004) 288.
[34] M.E. Pätsi, J.A. Hautaniemi, H.M. Rahiala, T.O. Peltola, I.M.O. Kangasniemi, Bonding strengths of titania
sol-gel derived coatings on titanium, J. Sol-Gel. Sci. Technol. 11 (1) (1998) 55.
[35] H. Matraszek, A. Stoch, C.Z. Paluszkiewicz, A. Broek, E. Długo, The application of sol-gel technique in
dentistry, Eng. Biomater. 23 (25) (2002) 81.
[36] J. Bienia, B. Surowska, A. Stoch, H. Matraszek, M. Walczak, The influence of SiO
2
and SiO
2
-TiO
2
inter-
mediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain, Dent. Mater. 25
(2009) 1128.
[37] D.B. Haddow, S. Kothari, P.F. James, R.D. Short, P.V. Hatton, R. Noort, Synthetic implant surfaces: 1. The
formation and characterization of sol-gel titania films, Biomaterials 17 (5) (1996) 501-507.
[38] J. Breme, Y. Zhou, L. Groh, Development of titanium alloy suitable for an optimized coating with hydroxy-
apatite, Biomaterials 16 (3) (1995) 239.
[39] F. Lusquinos, J. Pou, J.L. Arias, M. Boutinguiza, B. Leon, M. Perez-Amor, Alloying of hydroxyapatite onto
Ti6Al4V by high power laser irradiation, J. Mater. Sci. Mater. Med. 13 (6) (2002) 601.
[40] L. Besra, M. Liu, A review on fundamentals and applications of electrophoretic depositions (EPD), Prog.
Mater. Sci. 52 (1) (2007) 1.
[41] C. Kaya, Electrophoretic deposition of carbon nanotube-reinforced hydroxyapatite bioactive layers on
Ti-6Al-4V alloys for biomedical applications, Ceram. Inter. 34 (2008) 1843.
[42] M. Ferraris, P. Rabajoli, F. Brossa, L. Paracchini, Vacuum plasma spray deposition of titanium particle/
glass-ceramic matrix biocomposites, J. Am. Ceram. Soc. 79 (6) (1996) 1515.
[43] E. Verné, M. Ferraris, A. Ventrella, L. Paracchini, A. Krajewski, A. Ravaglioli, Sintering and plasma spray
deposition of bioactive glass-matrix composites for biomedical applications, J. Eur. Ceram. Soc. 18 (4)
(1998) 363.
[44] J.M. Gomez Vega, E. Saiz, A.P. Tomsia, G.W. Marshall, S.J. Marshall, Bioactive glass coatings with
hydroxyapatite and bioglass particles on Ti-based implants. 1. Processing, Biomaterials 21 (2000) 105.
[45] B. Grosgogeat, M. Boinet, F. Dalard, M. Lissac, Electrochemical studies of the corrosion behaviour of tita-
nium and the Ti-6Al-4V alloy using electrochemical impedance spectroscopy, Biomed. Mater. Eng. 14
(2004) 323.
[46] R. Narayanan, P. Mukherjee, S.K. Seshadri, Corrosion properties of anodic oxide coatings on Ti-6Al-4V in
simulated body solution, Trans. Inst. Metal. Finish. 84 (2006) 134.
[47] R. Karpagavalli, A. Zhou, P. Chellamuthu, K. Nguyen, Corrosion behavior and biocompatibility of nano-
structured TiO
2
film on Ti6Al4VJ, Biomed. Mater. Res. A 83 (2007) 1087.
