Information Technology Reference
In-Depth Information
The fourth and final stage of the boot sequence is the initialization of the interfaces. The %SYS-
5-RESTART: System restarted message is shown by the router in this stage. Several UPDOWN
interface and port messages are shown in this stage:
Initialize Flash file system.....
total size = 8388608
../src-m860-mc3810/mc3810_avm.c, 2105, AVM PIM present
Serial # 201205538
Version # 8.1
avm system bus fpga init pass:
:FPGA program OK.
avm fpga programming successful
:avm qslac fpga init pass:
:
00:00:03: 1/1 circuit type voice
00:00:03: 1/2 circuit type voice
00:00:16: %ATM-5-UPDOWN: Changing VC 0/16 VC-state to PVC activated.
00:00:16: %ATM-5-UPDOWN: Changing VC 0/16 VC-state to PVC created.
00:00:18: %SYS-5-CONFIG_I: Configured from memory by console
00:00:18: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:18: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:18: %LINK-3-UPDOWN: Interface Serial0, changed state to up
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to
down
00:00:18: %LINK-5-CHANGED: Interface ATM0, changed state to reset
00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) MC3810 Software (MC3810-A2ISV5-M), Version 12.0(7)XK1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 15-Mar-00 11:49 by phanguye
00:00:19: %LINK-5-CHANGED: Interface FR-ATM20, changed state to administratively
down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state
to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state
to down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state
to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FR-ATM20, changed state
to down
flashfs[9]: 1 files, 1 directories
flashfs[9]: 0 orphaned files, 0 orphaned directories
flashfs[9]: Total bytes: 8128000
flashfs[9]: Bytes used: 6699008
flashfs[9]: Bytes available: 1428992
flashfs[9]: flashfs fsck took 20 seconds.
flashfs[9]: Initialization complete.
00:00:39: %Voice-port 1/1 is up.
00:00:39: %Voice-port 1/2 is up.
00:00:39: %LINK-3-UPDOWN: Interface FXS 1/2, changed state to up
00:00:39: %LINK-3-UPDOWN: Interface FXS 1/1, changed state to up
UPDOWN
UPDOWN
UPDOWN
00:00:18: %SYS-5-RESTART: System restarted --
UPDOWN
UPDOWN
UPDOWN
UPDOWN
Configuration Register Bit Meanings
Table 3-1 shows a description of each bit in the configuration register. Bits 0 to 3 are the boot
field, which select the boot characteristics for the router. You use bit 6 to perform password
Search WWH ::




Custom Search