Engineering Properties of Biomass - Engineering and Science of Biomass Feedstock Production and Provision - page 34

34. Igathinathane C, Womac AR, Pordesimo LO et al (2008) Mold appearance and modeling on
selected corn stover components during moisture sorption. Bioresour Technol 99:6365-6371
35. Kuang X, Shankar TJ, Bi X et al (2008) Characterization and kinetics study of off-gas
emissions from stored wood pellets. Ann Occup Hyg 52:675-683
36. Guo W, Lim CJ, Bi X et al (2013) Determination of effective thermal conductivity and specific
heat capacity of wood pellets. Fuel 103:347-355
37. Guo W (2013) Self-heating and spontaneous combustion of wood pellets during storage.
Dissertation, University of British Columbia, Vancouver, Canada
38. ASABE Standards (2011) Moisture measurement—forages ASABE S358.2. In: ASABE
Standards 2011, American Society of Agricultural and Biological Engineers, St. Joseph, MI
39. CEN Standard (2004) Solid biofuels—methods for the determination of moisture content—
oven dry method—part 3: moisture in general analysis sample—DIN CEN/TS 14774-3. In:
German National Standard
40. Lam PS, Tooyserkani Z, Naimi LJ et al (2013) Pretreatment and pelletization of woody bio-
mass. In: Fang Z (ed) Pretreatment techniques for biofuels and biorefineries. Springer, Berlin,
Heidelberg
41. Lam PS, Sokhansanj S, Bi XT, Lim CJ, Melin S (2011) Energy input and quality of pellets
made from steam-exploded Douglas Fir (Pseudotsuga menziesii). Energy Fuel 25:1521-1528
42. Tooyserkani Z, Sokhansanj S, Bi X, Jim LC (2012) Steam treatment of four softwood species
and bark to produce torrefied wood. Appl Energy 103:514-521
43. Li H, Liu X, Legros R, Sokhansanj S (2012) Pelletization of torrefied sawdust and properties
of torrefied pellets. Appl Energy 93:680-685
44. Peng JH, Bi HT, Lim CJ (2013) Study on density, hardness and moisture uptake of torrefied
wood pellets. Energy Fuel 27:967-974
45. Wang C, Peng JH, Li H, Bi XT, Legros R, Lim CJ (2012) Oxidative torrefaction of biomass
residues and densification of torrefied sawdust to pellets. Bioresour Technol 127:318-325
46. Vamvuka D (2010) Overview of solid fuels combustion technologies. Handb Combust
4:31-84
47. National Renewable Energy Laboratory (NREL) (2005) NREL/TP-510-42622-Determination
of ash in biomass. National Renewable Energy Laboratory (NREL), Golden, CO
48. Sheng C, Azevedo JLT (2005) Estimating the higher heating value of biomass fuels from basic
analysis data. Biomass Bioenergy 28:499-507
49. Lam PS, Sokhansanj S, Bi XT, Lim CJ (2012) Colorimetry applied to steam-treated biomass
and pellets made from western Douglas fir (Pseudotsuga menziesii L.). Trans ASABE
55(2):673-678
50. Mani S, Tabil LG, Sokhansanj S (2004) Grinding performance and physical properties of
wheat and barley straws, corn stover and switchgrass. Biomass Bioenergy 27:339-352
51. Sone T (1969) Consistency of foodstuffs. Reidell Publishing Company, Dordecht, Holland
52. Chevanan N, Womac AR, Bitra VSP, Igathinathane C, Yang YT, Miu PI (2010) Bulk density
and compaction behavior of knife mill chopped switchgrass, wheat straw and corn stover.
Bioresour Technol 101:207-214
53. Miao Z, Grift TE, Hansen AC, Ting KC (2011) Energy requirement for comminution of
biomass in relation to particle physical properties. Ind Crops Prod 33:504-513
54. Nzokou P, Kamdem DP (2004) Influence of wood extractives on moisture sorption and
wettability of red oak (Quercus rubra), black cherry (Prunus serotina), and red pine (Pinus
resinosa). Wood Fiber Sci 36:483-492
55. Simpson W, Tenwold A (1999) Physical properties and moisture relations of wood. Wood
Handbook. USDA Forest Service, Forest Product Laboratory, Madison, WI, pp 1-23