Transportation - Engineering and Science of Biomass Feedstock Production and Provision - page 159

30. Igathinathane C, Womac A, Sokhansanj S, Narayan S (2008) Knife grid size reduction to
pre-process packed beds of high- and low-moisture switchgrass. Bioresour Technol 99(7):
2254-2264
31. Igathinathane C, Womac A, Sokhansanj S, Narayan S (2009) Size reduction of high- and low-
moisture corn stalks by linear knife grid system. Biomass Bioenergy 33(4):547-557
32. Mani S, Tabilb L, Sokhansanj S (2006) Effects of compressive force, particle size and moisture
content on mechanical properties of biomass pellets from grasses. Biomass Bioenergy
30(7):648-654
33. Tumuluru T, Wright C, Hess J, Kenney K (2011) A review of biomass densification systems to
develop uniform feedstock commodities for bioenergy application. Biofuels Bioprod Bioref
5(6):683-707
34. Freightcar America Inc. (2012) http://www.johnstownamerica.com/Coke-Coal-Railcars.htm .
Accessed 14 Aug 2012
35. Miao Z, Phillips J, Grift T, Mathanker S (2013) Energy and pressure requirement for
compression of Miscanthus giganteus to an extreme density. Biosyst Eng 114:21-25
36. Kaliyan N, Morey R (2009) Densification characteristics of corn stover and switchgrass. Trans
ASABE 52(3):907-920
37. Zou R, Yu A (1996) Evaluation of the packing characteristics of mono-sized non-spherical
particles. Powder Technol 88:71-79
38. Richard T (2010) Challenges in scaling up biofuel infrastructure. Science 329(5993):793-796
39. International ICF (2009) Comparative evaluation of rail and truck fuel efficiency on competi-
tive corridors. U.S. Department of Transportation, Federal Railroad Administration,
Washington, DC
40. Mahmudi H, Flynn P (2006) Rail vs truck transport of biomass. Appl Biochem Biotechnol
129-132:88-103
41. Searcy E, Flynn P, Ghafoori E, Kumar A (2007) The relative cost of biomass energy. Appl
Biochem Biotechnol 136-140(1-12):639-652
42. Kumar A, Flynn P (2006) Uptake of fluids by boreal wood chips: implications for bioenergy.
Fuel Process Technol 87:605-608
43. Rentizelas A, Tatsiopoulos I, Tolis A (2009) An optimization model for multi-biomass tri-
generation energy supply. Biomass Bioenergy 33:223-233
44. Gunnarsson C, Vågström L, Hansson P (2008) Logistics for forage harvest to biogas
production—timeliness, capacities and costs in a Swedish case study. Biomass Bioenergy
32(12):1263-1273
45. Le Gal P, Lyne P, Meyer E, Soler L (2008) Impact of sugarcane supply scheduling on mill
sugar production: a South African case study. Agric Syst 96(1-3):64-74
46. Miao Z, Grift T, Hansen A, Ting K (2013) An overview of lignocellulosic biomass feedstock
harvest, processing and supply for biofuel production. Biofuels 4(1):5-8
47. Lyne P (2010) The latest in transport management and technologies. SAIAE News Lett 3-5
48. Sustainability Program, Office of Research and Development, U.S. Environmental Protection
Agency (2007) Biomass conversion: emerging technologies, feedstock, and products.
EPA/600/R-07/144