Transportation - Engineering and Science of Biomass Feedstock Production and Provision - page 158

7. Mosier N, Wyman C, Dale B, Elande R, Lee Y, Holtzapple M, Ladisch M (2005) Features of
promising technologies for pre-treatment of lignocellulosic biomass. Bioresour Technol
96:673-686
8. Alizadeh H, Teymouri F, Gilbert T, Dale B (2005) Pre-treatment of switchgrass by Ammonia
Fiber Explosion. Appl Biochem Biotechnol 124(1-3):1133-1141
9. Chundawat S, Ventakesh B, Dale B (2007) Effect of particle size based separation of milled
corn stover on AFEX pre-treatment and enzymatic digestibility. Biotechnol Bioeng
96(2):219-231
10. Lam P, Sokhansanj S, Bi X, Lim C, Naimi L, Hoque M, Mani S, Womac A, Ye X, Narayan S
(2008) Bulk density of wet and dry wheat straw and switchgrass particles. Appl Eng Agric
24:351-358
11. Miao Z, Shastri Y, Grift T, Hansen A, Ting K (2012) Lignocellulosic biomass feedstock trans-
portation alternatives, logistics, equipment configuration and modeling. Biofuels Bioprod
Bioref 6:351-362
12. Smith J, Grisso R, VonBargen K, Anderson B (1988) Management tips for round bale hay
harvesting, moving, and storage. http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=2
306&context=extensionhist . Accessed 28 June 2013
13. Do Canto J, Klepac J, Rummer R, Savoie P, Seixas F (2011) Evaluation of two round baling
systems for harvesting understory biomass. Biomass Bioenergy 35:2163-2170
14. Cundiff J, Grisso R (2008) Containerized handling to minimize hauling cost of herbaceous
biomass. Biomass Bioenergy 2008:308-313
15. Shinners K, Boettcher G, Hoffman D, Munk J, Muck R, Weimer P (2009) Single-pass harvest
of corn grain and stover: performance of three harvester configurations. Trans ASABE
52(1):51-60
16. El Bassam N, Huisman W (2001) Harvesting and storage of Miscanthus. In: Walsh M, Jones
M (eds) Miscanthus for energy and fibre. James & James, London, pp 86-108
17. Bruglieri M, Liberti L (2008) Optimal running and planning of a biomass-based energy pro-
duction process. Energy Policy 36(7):2430-2438
18. Aggarwal A, Singh H, Kumar P, Singh M (2008) Optimizing power consumption for CNC
turned parts using response surface methodology and Taguchi's technique: a comparative
analysis. J Mater Proc Technol 200:373-384
19. Zhu J, Wang G, Pan X, Gleisner R (2009) Specific surface to evaluate the efficiencies of mill-
ing and pre-treatment of wood for enzymatic saccharification. Chem Eng Sci 64:474-485
20. Miao Z, Grift T, Hansen A, Ting K (2011) Energy requirement for comminution of biomass in
relation to particle physical properties. Ind Crop Prod 33:504-513
21. Kumar P, Barrett D, Delwiche M, Stroeve P (2009) Methods of pre-treatment of lignocellu-
losic biomass for efficient hydrolysis and biofuel production. Ind Eng Chem Res
48:3713-3729
22. Mani S, Tabil L, Sokhansanj S (2004) Grinding performance and physical properties of wheat
and barley straws, corn stover and switch grass. Biomass Bioenergy 27:339-352
23. Alvo P, Belkacemi K (1997) Enzymatic saccharification of milled Timothy (Phleum Pratense
L.) and alfalfa (Medicago Sativa L.). Bioresour Technol 61:185-198
24. Badger P, Fransham P (2006) Use of mobile fast pyrolysis plants to densify biomass and
reduce biomass handling costs-A preliminary assessment. Biomass Bioenergy 30:321-325
25. Akunov F (1995) Generalized grinding law. Chem Pet Eng 31(3-4):208-211
26. Cadoche L, López G (1989) Assessment of size reduction as a preliminary step in the production
of ethanol from lignocellulosic wastes. Biol Wastes 30:153-157
27. Jannasch R, Quan Y, Samson R (2001) Final report: a process and energy analysis of pelletizing
switch grass. Resource Efficient Agricultural Production (REAP), Ste. Anne de Bellevue, QC
28. Morrell S (2008) A method for predicting the specific energy requirement of comminution
circuits and assessing their energy utilisation efficiency. Miner Eng 21:224-233
29. Bitra V, Womac A, Chevanan N, Miu P, Igathinathane C, Sokhansanj S, Smith D (2009) Direct
mechanical energy measures of hammermill comminution of switchgrass, wheat straw, and
corn stover and analysis of their particle size distributions. Powder Technol 193:32-45