Geology Reference
In-Depth Information
Hoek, E.T. &Brown, E.T. 1997. Practical estimates of rock mass strength. International
Journal of Rock Mechanics & Mining Sciences, 34, 1165
1186.
Hoek, E. & Diederichs, M.S. 2006. Empirical estimation of rock mass modulus.
International Journal of Rock Mechanics & Mining Sciences, 43, 203
-
215.
Hoek, E., Kaiser, P.K. & Bawden, W.F. 1995. Support of Underground Excavations
in Rock. Rotterdam: A.A. Balkema, 215p.
Hoek E. & Marinos, P. 2000. Predicting Tunnel Squeezing. Tunnels and Tunnelling
International, Part 1, 32/11, 45
-
-
51, November 2000; Part 2, 32/12, 33
-
36,
December 2000.
Hoek, E. & Moy, D. 1993. Design of large powerhouse caverns in weak rock. In
Comprehensive Rock Engineering, Volume 5, Surface and Underground Project
Case Histories (Editor in Chief, J.A.Hudson; Volume Editor, E. Hoek), Oxford:
Pergamon Press, 85
-
110.
Holmes, A. 1965. Principles of Physical Geology, 2nd edition. London: Nelson& Sons.
Holzhausen, G.R. 1989. Origin of sheet structure, 1. Morphology and boundary
conditions. Engineering Geology, 27, 225
278.
Horn, H.M. & Deere, D.U. 1962. Frictional
-
characteristics of minerals.
335.
Hoshino, K. 1993. Geological evolution from the soil to the rock: Mechanism of
lithi
Géotechnique, 12, 319
-
cation and change of mechanical properties. In Geotechnical Engineering of
Hard Soils
138.
Houghten, D.A. &Wong, C.M. 1990. Implications of the karst marble at Yuen Long
for foundation investigation and design. Hong Kong Engineer, June, 19
-
Soft Rocks, Anagnostopoulos et al.(eds.),Rotterdam:Balkema,131
-
27.
Hudson, J.A. 1989. RockMechanics Principles in Engineering Practice. CIRIA Ground
Engineering Report: Underground Construction, London: Butterworths, 72p.
Hudson, J.A. 1992. Rock Engineering Systems. New York: Ellis Horwood, 185p.
Hudson, J.A. & Harrison, J.P. 1992. A new approach to studying complete rock
engineering problems. Quarterly
-
Journal of Engineering Geology
and
105.
Hudson, J.A. & Harrison, J.P. 1997. Engineering Rock Mechanics. An Introduction
to the Principles. Oxford: Pergamon Press, 444p.
Hudson, R.R. &Hencher, S.R. 1984. The delayed failure of a large cut slope in Hong
Kong. Proceedings of
Hydrogeology, 25, 93
-
the International Conference on Case Histories
in
-
682.
Hungr, O., Corominas, J. & Eberhardt, E. 2005a. Estimating landslide motion
mechanism, travel distance and velocity. In Landslide Risk Management, Hungr,
Fell, Couture & Eberhardt (eds.), London: Taylor & Francis Group, 99
Geotechnical Engineering, St Louis, Missouri, 679
128.
Hungr, O., Fell, R., Couture, R. & Eberhardt, E. (eds.) 2005b. Landslide Risk
Management. London: Taylor & Francis Group, 764p.
Hunt, R.E. 2005. Geotechnical Engineering Investigation Handbook, 2
nd
edition.
Boca Raton, FL: Taylor & Francis, 1066p.
Hutchinson, J.N. 2001. Reading the ground: morphology and geology in site apprai-
sal. Quarterly Journal of Engineering Geology and Hydrogeology, 334, 7
-
50.
Institution Civil Engineers 1996. Sprayed Concrete Linings (NATM) for Tunnels in
Soft Ground. London: Thomas Telford, 88p.
Institution Civil Engineers 2005. NEC3 Engineering and Construction Contract.
London: Thomas Telford.
Institute of Geological Sciences 1971. British Regional Geology: Northern England,
4th edition. HMSO, 125p.
International Society for Rock Mechanics 1974. Suggested Methods for Determining
Shear Strength. Final Draft, February 1974.
International Society for Rock Mechanics 1978. Suggested methods for the quantita-
tive description of discontinuities in rock masses. International Journal of Rock
Mechanics and Mining Sciences & Geomechanics Abstracts, 15, 319
-
-
368.
