Geology Reference
In-Depth Information
Geotechnical Engineering Of
ce 1992. Guide to Cavern Engineering (Geoguide 4).
Geotechnical Engineering Of
ce, Hong Kong, 156p.
Geotechnical Engineering Of
ce 1993. Guide to Retaining Wall Design (Geoguide 1),
2nd edition. Geotechnical Engineering Of
ce, Hong Kong.
Geotechnical Engineering Of
ce 2000a. Highway Slope Manual. Geotechnical
ce, Hong Kong, 114p.
Geotechnical Engineering Of
Engineering Of
ce 2000b. Technical Guidelines on Landscape
Treatment and Bio-engineering of Man-made Slopes and Retaining Walls. GEO
Publication No. 1/2000, Geotechnical Engineering Of
ce, Hong Kong, 146p.
Geotechnical Engineering Of
ce 2006. Foundation Design and Construction.
Geotechnical Engineering Of
ce, Hong Kong, 348p.
Geotechnical Engineering Of
ce 2007. Engineering Geological Practice in Hong
Kong, GEO Publication No. 1/2007, 278p.
Geotechnical Engineering Of
ce 2009. Catalogue of Notable Tunnel Failure Case
Histories (up to December 2008). Geotechnical Engineering Office, Hong Kong.
Gioda, G. & Sakurai, S. 2005. Back analysis procedures for the interpretation of
eld
measurements in geomechanics. International Journal for Numerical and Analytical
Methods in Geomechanics, 11, 555
583.
Glossop, R. 1968. The rise of geotechnology and its in
-
uence on engineering practice.
150.
Gomes, J.P., Batista A.L. &Oliveira, S. 2009. Damage-Chemo-Viscoelastic Model on
the Analysis of Concrete Dams under Swelling Processes. Proceedings International
Conference on Long Term Behaviour of Dams (LTBD09), Graz.
Goodman, R.E. 1980. Introduction to Rock Mechanics. New York: John Wiley &
Sons.
Goodman, R.E. 1993. Engineering Geology. Rock in Engineering Construction.
New York: Wiley, 412p.
Goodman, R.E. 2002. Karl Terzaghi
Eighth Rankine Lecture. Géotechnique, 18, 107
-
'
s legacy in geotechnical engineering. Geo-strata,
ASCE, October.
Goodman, R.E. 2003. Karl Terzhagi and engineering geology. In Geotechnical
Engineering, Ho, K.K.S. & Li, K.S. (eds.), Rotterdam: Balkema, 115
-
122.
Gordon, T., Scott, M.J. & Statham, I. 1996. The identi
cation of bedding shears and
their implications for road cutting design and construction. Prediction and
Performance in Rock Mechanics and Rock Engineering, Eurock
'
96, Torino,
603.
Graham, R.H. 1981. Gravity sliding in the Maritime Alps. Geological Society,
London, Special Publications, 9, 335
Italy, 597
-
352.
Green, P. &Western, R. 1994. Time to Face the Inevitable. A Submission fromFriends
of the Earth Ltd. to the UKDepartment of the Environment
'
s Review of Radioactive
Waste Management Policy, 72p.
Green, R.G. &Hawkins, A.B. 2005. Rock cut on the A5 at Glyn Bends, NorthWales,
UK. Bulletin Engineering Geology and Environment, 64, 95
-
-
109.
Grose, W.J. & Benton, L. (2005). Hull wastewater
flow transfer tunnel: tunnel
collapse and causation investigation. Geotechnical Engineering,158,4,
179
185.
Hack, R. 1998. Slope Stability Probability Classi
-
cation, SSPC, 2nd edition.
International Institute for Aerospace Survey and Earth Sciences (ITC), Publication
No. 43, 258p.
Haimson, B.C. 1992. Designing pre-excavation stress measurements for meaningful
rock characterization. In Rock Characterization, Eurock
'
92, Hudson, J.A. (ed.),
226.
HalcrowAsia Partnership 1998a. Report on the Ching Cheung Road Landslide of 3rd
August 1997. Geotechnical Engineering Of
London: Thomas Telford, 221
-
ce, Hong Kong, GEO Report No.
78, 47 p.
