Geology Reference
In-Depth Information
Archambault, G., Verreault, N., Riss, J. & Gentier, S. 1999. Revisiting Fecker-
Rengers-Barton
s methods to characterize joint shear dilatancy. In Rock
Mechanics for Industry, Amadei, Kranz, Scott & Smeallie (eds.), Rotterdam:
Balkema, 423
'
430.
Association of Geotechnical & Geoenvironmental Specialists 2006. AGS Guidelines
for Good Practice in Site Investigation, 2p.
Atkinson, J.H. 2000. Non-linear soil stiffness in routine design. Géotechnique, 50,
487
-
508.
Atkinson, J.H. 2007. The Mechanics of Soils and Foundations, 2nd edition. London:
Taylor & Francis, 442p.
Australian Standards 1993. Geotechnical site investigations.AS
-
1726.
Baecher, G.B. & Christian, J.T. 2003. Reliability and Statistics in Geotechnical
Engineering. London and New York: Wiley, 605p.
Bahat, D., Grossenbacher, K. & Karasaki, K. 1999. Mechanism of exfoliation joint
formation in granitic rocks, Yosemite National Park. Journal of Structural Geology,
21, 85
-
96.
Bandis, S.C. 1990. Scale effects in the strength and deformability of rocks and rock
joints. In Scale Effects in Rock Masses, Pinto da Cunha (ed.), Rotterdam: Balkema,
59
-
76.
Bandis, S.C., Lumsden, A.C. & Barton, N.R. 1981. Experimental studies of scale
effects on the shear behaviour of rock joints. International Journal of Rock
Mechanics and Mining Sciences and Geomechanics Abstracts, 18, 1
-
21.
Banyard, J.K, Coxon, R.E. & Johnston, T.A. 1992. Carsington Reservoir
-
-
reconstruction of the dam. Proceedings of the ICE
-
Civil Engineering, 92,
115.
Barla, G., Barla, M., Camusso, M. &Martinotti, M.E. 2007. Setting up a new direct
shear testing apparatus. Proceedings of the 11th Congress of the International
Society for Rock Mechanics, 1, 415
106
-
418.
Barla, G. & Jarre, P. 1993. Tunnelling under an industrial waste land
-
ll in Italy:
Environmental controls and excavation procedures. Safety and Environmental
Issues in Rock Engineering, Eurock
'
93, Lisbon: Balkema, 259
-
266.
Barla, G. & Pelizza, S. 2000. TBM Tunnelling in dif
cult conditions. Proceedings of
-
354.
Barton, N.R. 1973. Review of a new shear-strength criterion for rock joints.
Engineering Geology, 7, 287
GeoEng 2000, Melbourne, Australia, 329
332.
Barton, N.R. 1990. Scale effects or sampling bias? Proceedings of 1st International
Workshop on Scale Effects in Rock Masses, Loen, Norway, 31
-
55.
Barton, N.R. 2000. TBM Tunnelling in Jointed and Faulted Rock. Rotterdam:
Balkema, 173p.
Barton, N. 2002. Some new Q-value correlations to assist in site characterization and
tunnel design. International Journal of Rock Mechanics and Mining Science, 39,
185
-
216.
Barton, N.R. 2003. TBM or drill-and-blast. Tunnels & Tunnelling International,
June, 20
-
22.
Barton, N.R. 2005. Comments on
-
'
A critique of QTBM
'
. Tunnels & Tunnelling
19.
Barton, N.R. & Bandis, S.C. 1990. Review of predictive capabilities of JRC-JCS
model in engineering practice. In Rock Joints, Proceedings International
Symposium on Rock Joints, Loen, Norway, Barton, N. & Stephansson, O. (eds.),
Rotterdam: Balkema, 603
International, July, 16
-
-
610.
Bates, A.D. 1981. Pro
t or loss pivot on pre-dredging surveys. Dredging + Port
Construction, April 1981, Intec Press, UK. [Referenced in PIANC (2000) Site
investigation requirements for dredging works, Report of Working Group No. 23,
32p.]
