Graphics Programs Reference
In-Depth Information
properties that automatically populate as you begin to place views of
components in the drawing.
4. Zoom in on the lower-left corner of the title block. Make sure you can
clearly see the space with the word Mass in the upper-left corner.
5. Select the property text <ENG APPROVED BY> above the Mass cell.
6. Press Ctrl+C to copy the property to the Windows Clipboard.
7. Press Ctrl+V to paste a copy back into the title block.
The copied property will usually be duplicated just above the
original text.
8. Click and drag the new text down to the open cell below the word Mass.
9. Use a Coincident constraint to connect the origin point of the text to
the point at the intersection of the title block, as shown in Figure 5.7.
10. Once the text moves, use the Esc key to stop the constraint.
FIGURE 5.6 The line work, text, and properties behind a title block
FIGURE 5.7 Sketch constraints work to control
the location of text in the title block.
Search WWH ::




Custom Search