Environmental Engineering Reference
In-Depth Information
Riffat, S. B. & Zhu, J. (2004). Mathematical model of indirect evaporative cooler using
porous ceramic and heat pipe
Applied Thermal Engineering
,
vol. 24
, Issue 4, March,
Pages 457-470.
Robert, L. (2003). Minimizing Legionella concentration in cooling water systems,
Water
Technol Mag
.
Vasiliev, L. L. (2005). “Heat pipes in modern heat exchangers”.
Applied Thermal
Engineering
25, 1-19.
Shao, L., Riffat, S. B. & Gan, G. “Heat recovery with low pressure loss for natural
ventilation”.
Energy and Buildings
,
vol. 28
, Issue 2, October 1998, Pages 179-184
Lukitobudi, A. R., Akbarzadeh, A., Johnson, P. W. & Hendy, P. (July 1995). “Design,
construction and testing of a thermosyphon heat exchanger for medium temperature heat
recovery in bakeries”
Heat Recovery Systems and CHP
,
vol. 15
, Issue 5,Pages 481-491.
Noie-Baghban, S. H. & Majideian, G. R. (1 October 2000). “Waste heat recovery using heat
pipe heat exchanger (HPHE) for surgery rooms in hospitals”
Applied Thermal
Engineering
,
vol. 20
, Issue 14, Pages 1271-1282
Mostafa, A. Abd El-Baky 1 & Mousa M. Mohamed. (2007). “Heat pipe heat exchanger for
heat recovery in air conditioning”.
Applied Thermal Engineering
, 27, 795-801.
Larson, E. D. Nilsson, L. J. (1991). Electricity use and efficiency in pumping and air handling
system,
ASHRAE Trans
., 97 (part 2), 363-377.
Faghri, A. et al. Heat pipe for hands,
Mech. Eng
. 111 (6) (1989) 72-75.
Liu, G. et al. (1992). The application of heat pipe heat exchanger in exhaust gas heat recovery
system and its thermodynamic analysis, in:
8th International Heat Pipe Conference
,
Beijing
,
China, 582-585.
Dube, V., Sauciuc, I. & Akbarzadeh, A. (1996). Design construction and testing of a
thermosyphon heat exchanger for medium temperature heat recovery, in:
5th
International Heat Pipe Symposium, Melbourne
, Australia.
Tan, J. O. & Liu, C. Y. (1990) Predicting the performance of a heat pipe heat exchanger using
the NTU method,
Int. J. Heat Fluid
Fl. 11 (4), 376-379.
Söylemez, M. S. (September 2003). “On the thermoeconomical optimization of heat pipe heat
exchanger HPHE for waste heat recovery”.
Energy Conversion and Management
,
vol. 44
,
Issue 15, Pages 2509-2517
Lin, S., Broadbent, J. & McGlen, R. (January 2005). “Numerical study of heat pipe
application in heat recovery systems”
Applied Thermal Engineering
,
vol. 25
, Issue 1,
Pages 127-133
Noie. S. H. (April 2006). “Investigation of thermal performance of an air-to-air thermosyphon
heat exchanger using ε-NTU method”.
Applied Thermal Engineering
,
vol. 26
, Issues 5-6,
Pages 559-567
International Organization for Standardization. (1995).
Guide to the expression of uncertainty
in measurement
:101, ISO Geneva.