Differentiators - Digital Filter Design Solutions - page 387

References

[1] Vanio, O., M. Renfors, and T. Saramaki. “Recursive Implementation of FIR Differentiators with
Optimum Noise Attenuation.” IEEE Trans. Instrum. Meas. Vol. 46 , 1997, pp. 1202-1207.
[2] Tseng , C-C, and S-L. Lee. “Design of Digital Differentiator Based on Maximum Signal to Noise
Ratio Criterion.” Proc. 2001 IEEE Symp. On Circuits and Sysems, Vol. 2 , 2001, pp. 77-80.
[3] Carlsson, B., M. Sternad, and A. Ahlen. “Digital Differentiation of Noisy Data Measured
Through a Dynamic System.” IEEE Trans. Signal Process , Vol. 40, 1992, pp. 218-221.

[4] De Freitas, J. M. “Noise Attenuation Properties of Non-Recursive FIR Filters.” Meas. Sci.
Technol. VoL. 14, 2003, pp. 1701-1713.

[5] Oppenheim, A. V., and R. W. Schafer. Discrete-Time Signal Processing , 2nd. Ed. Englewood

Cliffs, NJ, Prentice-Hall, 1999.

[6] Kumar, B., and S.C. Dutta Roy. “Design of Digital Differentiators For Low Frequencies.” Proc.

IEEE, Vol. 76, 1988, pp.287-289.

[7] Carlsson, B. “Maximum Flat Digital Differentiator.” Electron. Lett . Vol. 27, 1991, pp. 675-677.

[8] Khan, I. R., and R. Obha. “New Design of Full Band Differentiators Based on Taylor Series.”

IEE Proc. Vis. Image Signal Process , Vol. 146, 1999, pp. 185-189.

[9] Khan, I. R., R. Obha, and N. Hozumi. “Mathematical Proof Of Explicit Formulas For Tap

Coefficients Of Full Band FIR Digital Differentiators.” IEE Proc. Vis. Image Signal Process .
Vol. 147, 2000, pp. 553-555.

[10] McClellan, J. H., and T. W. Parks. “A Unified Approach to the Design of Optimum FIR Linear-
Phase Digital Filters.” IEEE Trans. Circuit Theory. Vol. CT-20, No. 6, 1973, pp. 697-701.
[11] Capellini, V., A. G. Constantinides, and P. E. Emiliani. Digital Filters and their Applications ,
New York, Academic Press, 1978.
[12] Mollova, G. “Compact Formulas for Least Squares Design of Digital Differentiators.” Electron.
Lett . Vol. 35 , No. 20, 1999, pp. 1695-1697.
[13] Al-Alaoui, M. A. A. “Class of Second-Order Integrators and Low-Pass Differentiators.”
Electron. Lett . Vol. 29 , No. 4, 1993, pp. 376-378.

[14] Mollova, G. and R. Unbehauen. “Analytical Design of Higher-Order Differentiators Using Least-
Squares Technique.” Electron. Lett . Vol. 37 , No. 17, 2001, pp. 1098-1099.

[15] Chen, C-K, and J-H. Lee. “Design of High-Order Differentiators Using the L1 Error Criteria.”
IEEE Trans. Circuits Syst. II. Vol. 42, No. 4, 1995, 287-291.
[16] Kumar, B., S.C. Dutta Roy, and S. Sabharwal. “Interrelations Between the Coefficients of FIR
Digital Differentiators and Other FIR Filters and a Versatile Multifunction Configuration.”
Signal Proc . Vol. 39 , 1994, 247-262.

[17] Matlab , The MathWorks, Inc. 3 Apple Hill Drive, Natick, MA, USA.