Bibliography - Disposable Bioprocessing Systems - page 278

Paul, E.L., Atiemo-Obeng, V.A., and Kresta, S.M. 2004. Introduction. In Paul, E.L.,
Atiemo-Obeng, V.A., and Kresta, S.M. (eds.), Handbook of Industrial Mixing-
Science and Practice . Hoboken, NJ: John Wiley & Sons, xxxiii-lviii.
PDA Technical Report No. 26. 1998. Sterilizing Filtration of Liquids. PDA J. Pharmaceut.
Sci. Technol . 52, S1.
PDC Aseptic Filling Systems. 2010. Thermoelectric Tube Sealer—Technical data
sheet. Available: http://www.asepticilling.com/Thermoelectric%20Tube%20
Sealer%20Data%20Sheet%20Reviewed%20Rev%205.pdf .
Peacock, L. and Auton, K.A. 2008. Comparing shaker flasks with a single-use bioreac-
tor for growing yeast seed cultures. BioProcess Int. 6: 54-57.
Pekeler, T., Lindemann, C., Scheper, T., and Hitzmann, B. 1998. Prediction of biopro-
cess parameters from two-dimensional fluorescence spectra. Chemie Ingenieur
Technik 70 (12): 1610-1611.
PendoTECH. 2009. Process scale single use pressure sensors. Available: http://www.
pendotech.com/products/disposable_pressure_sensors/disposable_pressure_
sensors.htm .
Peter, C.P., Suzuki, Y., and Büchs, J. 2006. Hydromechanical stress in shake flask:
Correlation for the maximum local energy dissipation rate. Biotechnol Bioeng 93:
1164-1176.
Pharmaceutical Inspection Co-operation Scheme. 2007. Aide memoire: Inspection of
biotechnology manufacturers. PI 024-2, PIC/S Secretariat. Geneva, Switzerland.
Pharmaceutical Inspection Co-operation Scheme. 2007. Isolators used for aseptic pro-
cessing and sterility testing. PI 014-3, PIC/S Secretariat. Geneva, Switzerland.
Pharmaceutical Inspection Co-operation Scheme. 2007. Recommendations on vali-
dation master plan, installation and operational, nonsterile process validation,
cleaning validation. PI 006-3, PIC/S Secretariat. Geneva, Switzerland.
Pharmaceutical Inspection Co-operation Scheme. 2007. Recommendation on sterility
testing. PI 012-3, PIC/S Secretariat Geneva, Switzerland.
Pharmaceutical Inspection Co-operation Scheme. 2009. Recommendations on the val-
idation of aseptic processes. PI 007-5, PIC/S Secretariat. Geneva, Switzerland.
Phillips, M., Cormier, J., Ferrence, J., Dowd, C., Kiss, R., Lutz, H., and Carter, J. 2005.
Performance of a membrane adsorber for trace impurity removal in biotechnol-
ogy manufacturing. Chromatogr. A 1078: 74-82.
Pierce, L.N. and Shabram, P.W. 2004. Scalability of a disposable bioreactor from 25
L-500 L run in perfusion mode with a CHO cell-based cell line: A tech review.
BioProcessing J 4: 51-56.
Pinto, F. 1999. Effect of experimental parameters on plastics pyrolysis reactions.
Proceedings R99. Geneva.
Pora, H. 2006. Increasing bioprocessing efficiency, single use technologies. Pharm.
Technol. Eur . 18: 24-29.
Pora, H. 2006. The case for disposable manufacturing equipment to accelerate vaccine
development. BioPharm Int . 19(6).
Pora, H. and Rawlings, B. 2009. A user's checklist for introducing single-use compo-
nents into process systems. BioProcess Int . 4: 9-16.
Pora, H. and Rawlings, B. 2009. Managing solid waste from single-use systems in
biopharmaceutical manufacturing. BioProcess Int . 7(1): 18-25.
Potera, C. 2009. Firm on quest to improve biomanufacturing. Genet Eng. Biotechnol.
News 7: 20-21.