Biomedical Engineering Reference
In-Depth Information
Liu, C.Z., Towler, M.J., Medrano, G., Cramer, C.L., and Weathers, P.J. 2009. Production
of mouse interleukin-12 is greater in tobacco hairy roots grown in a mist reactor
than in an airlift reactor.
Biotechnol. Bioeng
. 102: 1074-1086.
Liu, P 2005. Strategies for optimizing today's increasing disposable processing envi-
ronments.
BioProcess Int
. 9: 10-15.
Liu, P. 2005. Strategies for optimizing today's increasing disposable processing envi-
ronments.
BioProcess Int
. 3(9): S10-S15.
Liu, P. 2005. Strategies for optimizing today's increasingly disposable processing
environments.
BioProcess Int.
3(6, Supplement): 10-15.
Lloyd-Evans, P., Phillips, D.A., Wright, A.C.C., and Williams, R.K. 2007. Disposable
process for cGMP manufacture of plasmid DNA.
BioPharm Int
. 1: 18-24.
Lok, M. and Blumenblat, S. 2007. Critical design aspects of single-use systems: Some
points to consider for successful implementation.
BioProcess Int
. Suppl. 5 (S):
28-31.
Lorenz, C.M., Wolk, B.M., Quan, C.P., Alcal, E.W., Closely, M., McDonald, D.J., and
Matthew, T.C. 2009. The effect of low intensity ultraviolet C light on monoclonal
antibodies.
Biotechnol. Prog
. 25: 476-482.
Lorenzelli, L., Margesin, B., Martinoia, S., Tedesco, M.T., and Valle, M. 2003.
Bioelectrochemical signal monitoring of in-vitro cultured cells by means of an
automated microsystem based on solid state sensor-array.
Biosens. Bioelectron
.
18 (5-6): 621-626.
Lu, J.Z. and Rosenzweig, Z. 2000. Nanoscale fluorescent sensors for intracellular anal-
ysis.
Fresenius J. Anal. Chem
. 366 (6-7): 569-575.
Lute, P., Bailey, M., Combs, J., Sukumar, M., and Brorson, K. 2007. Phage passage after
extensive processing in small-virus retentive filters.
Biotechnol. Appl. Biochem
.
47: 141-151.
Lytle, C. and Sagripanti, J. 2005. Predicted inactivation of viruses of relevance to bio-
defense by solar radiation.
J. Virol
. 79: 14244-14252.
Maa, Y.F. and Hsu, C.C. 1999. Performance of sonication and microfluidization for
liquid-liquid emulsification.
Pharm. Dev. Technol
. 4 (2): 233-240.
Mach, C.J. and Riedman, D. 2008. Reducing microbial contamination risk in biothera-
peutic manufacturing: Validation of sterile connections.
BioProcess Int
. 6(8):
20-26.
Maharbiz, M.M., Holtz, W.J., Howe, R.T., and Keasling, J.D. 2004. Microbioreactor
arrays with parametric control for high-throughput experimentation.
Biotechnol.
Bioeng
. 86 (4): 485-490.
Maier, U. and Büchs, J. 2001. Characterization of the gas-liquid mass transfer in shak-
ing bioreactors.
Biochem. Eng. J
. 7: 99-106.
Maier, U., Losen, M., and Büchs, J. 2003. Advances in understanding and modeling
the gas-liquid mass transfer in shake flasks.
Biochem Eng J.
17: 155-167.
Mardirosian, D., Guertin, P., Crowell, J., Yetz-Aldape, J., Hall, M., Hodge, G.,
Jonnalagadda, K., Holmgren, A., and Galliher, P. 2009. Scaling up a CHO-
produced hormone-protein fusion product.
BioProcess Int
. 7 (Suppl. 4): 30-35.
Margesin, R., Schneider, M., and Schinner, F. 1995.
Praxis der biotechnologischen
Abluftreinigung
. Berlin: Springer.
Marks, D.M.. 2003. Equipment design considerations for large scale cell culture.
Cytotechnology
42: 21-33.