Information Technology Reference
In-Depth Information
Checking PNNI Networks
You can use the AtmDirector application to troubleshoot your PNNI network by checking the node
configurations (including the PNNI timers), monitoring the link status of neighboring peers and PNNI
addresses, and tuning the PNNI parameters. Refer to the following sections of online AtmDirector
manual, located at the following web addresses, for the information you need:
http://cio.cisco.com/unviercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/cwsi_2x/cwsi_2_2/at
md_c/pnnicfg.htm
http://cio.cisco.com/unviercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/cwsi_2x/cwsi_2_2/at
md_c/pnniaddr.htm
http://cio.cisco.com/unviercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/cwsi_2x/cwsi_2_2/at
md_c/pnnimgmt.htm
Displaying the Node Configuration and Information
•
Modifying the Node Configuration
•
Displaying Link Information
•
Displaying the Values of the PNNI Timers
•
Modifying the Values of the PNNI Timers
•
Displaying Neighboring Peer Link and Status Information
•
Display Address Summaries
•
Modify an Address Summary
•
Add an Address Summary
•
Delete an Address Summary
•
Displaying Reachable Addresses
•
Modify a Reachable Address
•
Add a Reachable Address
•
Delete a Reachable Address
•
Display Address Scope Mapping
•
Modify Address Scope Mapping
•
Display PNNI Interface Parameters
•
Modify PNNI Interface Parameters
•
Collecting Data for Troubleshooting
The AtmDirector application has some features that require you to enable data collection for
troubleshooting purposes. The collected data is used to help you perform the following tasks:
•
Display top
N
active hosts in a fabric or clients in an ATM-VLAN
•
Display traffic between hosts or between clients
•
Display a graphical analysis of call failures to and from devices in a fabric or ATM-VLAN
Refer to the following sections of online AtmDirector manual, located at
http://cio/cisco/com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/cwsi_2x/cwsi_2_2/atmd_
c/enable2.htm#xtocid56365 for the information that you need to collect data:
•
Enabling Data Collection
