Information Technology Reference
In-Depth Information
Table24-11 Cannot Configure the Configuration Server (continued)
Probable Cause
Possible Solution
The
configuration
server's ATM
address could
not be
configured on
the ATM
switches.
Verify the community strings and increase the SNMP timeout.
To check the community strings and increase the SNMP timeout,
select Edit; SNMP Communities from the CWSI Campus map. See
“Preparing for Network Discovery” of the
Getting Started with
CWSI Campus
publication if you need additional assistance
entering the correct community strings and timeout value.
These solutions
do not resolve
the problem.
Enable
trace
and
debug
entering the following command:
ani -trace frontend -debug vlad -debug lane -debug ilmi
-trace pnni -debug vmpsadmin -trace devices
-debug devices.C5K -debug devices.C5K.C5500 -debug
devices.LS1010 -debug devices.Router -debug devices.C3K
-debug devices.C2800 -logfile ani.log
Troubleshooting AtmDirector
This subsection describes how you can use the tools within the AtmDirector application to troubleshoot
and enhance your network.
Logging Messages
The AtmDirector application logs error and debug messages that are useful when you need to
troubleshoot your network or to resolve any problems. The error and debug messages are automatically
recorded (by default) in the $CWSIROOT/log/atmd.log file.
To set the logging option on or off, follow these steps:
Step 1
Select Preferences; Options from the AtmDirector main window. The Global Preferences window opens.
Step 2
Select the Miscellaneous index tab. The Miscellaneous options are displayed.
Step 3
Click the On button to log error and debug messages, or click the Off button to stop logging the error
and debug messages. Topology and discovery messages are automatically logged if the On button is
selected. This is the default.
If the discovery process is polling, messages are logged after Discovery has
completed polling.
Note
Click OK.
You can start or stop logging the error and debug messages while the AtmDirector application is running.
The option that you select (On or Off) will not change when the application is terminated.
Step 4
It is recommended that you keep the debug option On.
Note