Information Technology Reference
In-Depth Information
Table24-9 Incorrect or Missing Association between VTP VLAN and ATM-VLAN (continued)
Probable Cause
Possible Solution
LANE clients
exist but are not
discovered.
Make sure that devices are not timing out.
LANE servers
exist on devices
that do not have
enough memory.
If the configuration server resides on a Catalyst 5000 series switch,
verify that the device has at least 16 MB of memory.
No rediscovery
is done after
configuring
VLANs with
LANE services
enabled.
1.
From the CWSI Campus Map window, select View;
Rediscover Map.
2.
Start the VlanDirector application by selecting Tools;
VlanDirector from the CWSI Campus Map.
3.
From the VlanDirector Names window, select File; Refresh.
See the
Using the Campus VlanDirector Application
publication
for additional assistance.
These solutions
do not resolve
the problem.
Enable
trace
and
debug
entering the following command:
ani -trace frontend -debug vlad -debug lane -debug ilmi -trace pnni
-debug vmpsadmin -trace devices
-debug devices.C5K -debug devices.C5K.C5500 -debug
devices.LS1010 -debug devices.Router -debug devices.C3K
-debug devices.C2800 -logfile ani.log
Table24-10 Cannot Create or Modify a VLAN with LANE Services Enabled
Probable Cause
Possible Solution
This is the same
as the probable
cause in Table
24-7's contents
in rows 1
through 4.
Check the corresponding solutions in the same rows in Table 24-7.
LE server was
not created.
Increase the timeout for the device on which you have configured
the LE server.
The
configuration
server could not
be configured.
The LE server ATM address already exists in the configuration
server database.
Make sure that the ATM address of the newly created LE server is
not already present in the configuration server database.
These solutions
do not resolve
the problem.
Enable
trace
and
debug
entering the following command:
ani -trace frontend -debug vlad -debug lane -debug ilmi
-trace pnni -debug vmpsadmin -trace devices
-debug devices.C5K -debug devices.C5K.C5500 -debug
devices.LS1010 -debug devices.Router -debug devices.C3K
-debug devices.C2800 -logfile ani.log
