Information Technology Reference
In-Depth Information
Customizing the Discrepancy Report
You can customize the Discrepancy Report to display only those discrepancies about which you want to
be notified.
From the CWSI Campus Map, select Options; Properties. The CWSI Properties window opens.
Step 1
In the Properties window, select Discrepancy. The discrepancies are displayed.
Step 2
Select only those discrepancies that you want displayed.
Step 3
Troubleshooting Information for Applications Included in CWSI
Campus
The following subsections are presented in this section:
Troubleshooting VlanDirector
•
Troubleshooting AtmDirector
•
Troubleshooting TrafficDirector
•
Troubleshooting CiscoView
•
Troubleshooting VlanDirector
Use the information provided here to help you troubleshoot problems with the VlanDirector application.
Does VTP Need To Be Enabled?
The VlanDirector application requires VTP to be enabled. For most predictable results, Cisco
recommends having at least one switch configured as a VTP server, and the remaining switches
configured as VTP clients.
If There Are Multiple VTP Servers in a VTP Domain, Which VTP Server Does VlanDirector Make the
Changes To?
If the two VTP servers are in the same domain and are connected by VTP trunks, it does not matter which
switch the VlanDirector application changes. VTP ensures that the information on all VTP servers and
clients in a single VTP domain is coordinated and shares the same configuration.
If the servers are in different VTP domains, then they do not share VLAN states, and they are both known
to the VlanDirector application. You must select the VTP domain in which you want to make the VLAN
changes, and the corresponding VTP servers will reflect those changes.
If there are two servers with the same VTP domain that are not connected by trunks, the configurations
managed by the two servers may diverge. This configuration is not supported by the VlanDirector
application, and it creates a discrepancy.