Information Technology Reference
In-Depth Information
For the command-line interface, to restart a process using the CLI, perform the following steps:
Step 1
Enter
pdexec DbServer
.
Step 2
Enter
pdshow DbServer
again to see whether the process is operating properly.
If the process is operating properly, the following message appears:
Process= DbServer
State = Running normally
Pid = 21473
RC = 0
Signo = 0
Start = 19:16:15 06/02/1999
Stop = Not applicable
Core = Not applicable
Info = Data server (dbeng50) invoked
If the process is still not running normally, check the error log for further troubleshooting.
Stopping a Process
Scenario
: You want to back up all data that you have stored on your hard drive, so you shut down the
DbServer process.
On the desktop interface, to stop the DbServer process using the navigation tree, perform the following
steps:
Select Admin; System Admin; Stop Process.
Step 1
The Stop Process dialog box appears.
Step 2
Click the Process radio button.
Step 3
Select DbServer from the Process Name drop-down list box, and then click Finish.
The process stops, and the Process Status table displays the message “Administrator has shut down this
server.”
On the command-line interface, to stop the DbServer process using the CLI, perform the following steps:
Step 4
Enter
pdterm DbServer
.
Step 1
Enter
pdshow DbServer
.
The following status message appears, showing that the process has been stopped.
Step 2
Process= DbServer
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 19:16:15 06/02/97
Stop = 11:27:05 06/03/97
Core = Not applicable
Info = Not applicable
