Information Technology Reference
In-Depth Information
When the download has completed, the image will be decompressed and run by the MSFC. The next
prompt will be the boot prompt at the MSFC.
Self decompressing the image : ####################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-BOOT-M), Version 12.0(7T)XE1(1.11) INTERIM TEST
SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 28-Dec-99 04:44 by
Image text-base: 0x60008900, data-base: 0x603B2000
cisco Cat6k-MSFC (R5000) processor with 57344K/8192K bytes of memory.
Processor board ID SAD03483410
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
123K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
Press RETURN to get started!
00:00:04: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-BOOT-M), Version 12.0(7T)XE1(1.11) INTERIM TEST
SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 28-Dec-99 04:44 by
Router(boot)>
The xmodem download did not copy the boot loader image into the MSFC boot Flash. The download
simply loaded and uncompressed image to run the MSFC.
The next step is to copy the boot loader image form the supervisor's slot 0 into the MSFC's boot Flash.
From the MSFC boot prompt, you will not be able to see the supervisor's slot 0 or display its contents.
You need to remember the boot loader image name so that you can issue the following command:
If you are running the Cat OS image, use:
copy sup-slot0:<boot loader image> bootflash:<boot loader image>
If you are running the Cat IOS image, use:
download slot0:<boot loader image> bootflash:<bootloader image>
Note: Remember, the MSFC will not be capable of copying an image from any location other than the
supervisor's slot 0.
