Information Technology Reference
In-Depth Information
Table11-5
DECnet: Routers Not Establishing Adjacencies (continued)
Possible Problem
Solution
Node address out
of range
1.
Use the
show running-config privileged exec
command to
view router configurations. Check to see whether the
decnet max-address
global configuration command has
been configured. This command sets the highest DECnet
node number allowed in the area.
Note:
The
decnet max-address
command specifies the highest
node number allowed in an area,
not
the maximum number of
node addresses allowed in an area. For example, if you configure
the command
decnet max-address 1000
on a router and you
configure a node with a node address of 1001, the address is out
of range.
The default maximum address is 1023. However, if another
value is configured, the node address might be more than the
configured value. If this is the case, increase the maximum
address value using the
decnet max-address
command.
2.
