Information Technology Reference
In-Depth Information
When the system has initialized successfully, the system banner should be displayed on the console
screen. If it is not displayed, make sure that the console terminal is properly connected to the RP console
port and that the terminal is set correctly. The system banner should look similar to the following:
System Bootstrap, Version 4.6(5), SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
RP1 processor with 16384 Kbytes of memory
### [...] ###
F3: 2012356+47852+194864 at 0x1000
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
GS Software (GS7), Version 10.3(1) [fc3], RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems, Inc.
RP1 (68040) processor with 16384K bytes of memory.
[...]
Press RETURN to get started!
If problems occur, try to isolate the problem to a specific subsystem. The Cisco 7000 series routers have
the following subsystems:
•
Power subsystem
—Includes power supplies, fans, external power cable, and internal power harness
that connects to the backplane
•
Cooling subsystem
—Depending on your system, includes the following:
-
Cisco 7000
—Chassis blower
-
Cisco 7010
—Fan tray assembly, including six individual fans, the fan control board, and the
tray itself
•
Processor subsystem
—Includes the RP, SP (or SSP), and all interface processors
