Graphics Reference
In-Depth Information
12.
On the Ribbon, click
Direct Sketch > More Curve > Studio Spline
.
13.
On the
Studio Spline
dialog, select
Type > Through Points
.
14.
Select the five points, as shown.
15.
Select the three points, as shown.
16.
Likewise, select other points, as shown.
17.
Under the
Parameterization
section, set the
Degree
value to 2, and check the
Closed
option.
18.
Click
OK
.
19.
Click
Yes
on the
Continuous Auto Dimensioning
message box. The auto di-
mensions are not created.
20.
Double-click on the spline.