Graphics Reference
In-Depth Information
4.
Click
Finish
on the
Sketch
group.
5.
Enter 10 in the
End
box attached to the preview.
6.
Click
Reverse Direction
in the
Direction
section.
7.
Select
Subtract
in the
Boolean
section.
8.
Click
OK
to construct the cut feature.
Adding another Cut-out
1.
Draw a sketch on the front face of the model geometry (Use the
Profile
com-
mand to create the lines, and then project the inner circular edge. Use the
Trim
Recipe Curve
command to trim the projected curve. Also, add dimensions).
