Graphics Reference
In-Depth Information
Adding another Extruded Feature
1.
Draw a sketch on the back face of the base feature (Use the
Profile
command to
create the lines, and then project the outer circular edge. Use the
Trim Recipe
Curve
command to trim the projected curve).
You can use the
Rotate
button from the
View
tab to rotate the model.
2. Extrude the sketch up to 10 mm thickness.
To move the part view, click
View > Orientation > Pan
, then drag the part to move it
around in the graphics area.
3.
Click
View > Style > Shaded with Edges
on the ribbon.