Graphics Reference
In-Depth Information
16.
Select the
Extrude
feature from the
Part Navigator
.
17.
Expand the
Details
section on the
Part Navigator
.
18.
Double-click on the
Start Limit
value and type 10. The model is updated, as
shown.
19.
Save and close the part file.
TUTORIAL 2
In this tutorial, you will create expressions to drive the parameters of a bolt.
1.
Start a new part file.
2.
Activate the
Extrude
command and select the YZ plane.
3.
Create a circle of 20 mm diameter.
4.
Click
Finish
.
5.
Extrude the sketch up to 80 mm distance.
