Graphics Reference
In-Depth Information
1.
On the ribbon, click
Home > Feature > Edge Blend
.
2.
Set the Radius 1 to 5
3.
Select the edges of the geometry, as shown.
4.
Expand the
Corner Setback
section and click
Specify End Point
.
5.
Select the vertex point, as shown.
6.
Under the
Corner Setback
section, expand the
List
section.
7.
Select the setback points one-by-one and change the setback values, as shown.
You can also change the setback values on the handle attached to the corner.