Graphics Reference
In-Depth Information
6.
On the
Chamfer
dialog, select
Cross Section > Symmetric
.
7.
Type-in
45
in the
Distance
box.
8.
Click on the corner edge of the second feature.
9.
Click
OK
.
10.
Save the model.
Edit Parameters
1.
Click on the Drilled hole and select
Edit Parameters
from the Shortcuts tool-
bar.
2.
On the
Hole
dialog, select
Type > General Hole
.
3.
Under the
Form and Dimensions
section, select
Form > Counterbored
.
4.
Set the Dimensions of the counterbored hole, as shown.
