Graphics Reference
In-Depth Information
The
Chamfer
tool replaces the sharp corners with an angled line. This tool is similar to the
Fillet
tool, except that an angled line is placed at the corners instead of a round.
1.
Click
Home > Direct Sketch > Chamfer
on the Ribbon.
2.
On the
Chamfer
dialog, select
Chamfer > Symmetric.
3.
Click on the corner, as shown.
4.
Type-in a value in the
Distance
box and press Enter.
5.
Close the dialog.
Mirror Curve
The
Mirror Curve
tool creates a mirror image of objects. You can create symmetrical
sketches using this tool.
1.
On the ribbon, click
Home > Direct Sketch > Mirror Curve
2.
Drag a selection lasso covering all the sketch entities.