Biomedical Engineering Reference
In-Depth Information
[61] Tabeling, P., et al., “Playing with actuators in microfluidic systems,”
Proceedings of the
NSTI-Nanotech Conference 2006
, Vol. 2, 2006.
[62] Willaime, H., et al., “Arnold Tongues in a Microfluidic Drop Emitter,” Phys
. Rev. Let.
,
Vol. 96, 2006, pp. 054501-4.
[63] Handique, H., and M.A. Burns, “Mathematical modeling of drop mixing in a slit-type
microchannel
,” J. Micromech. Microeng.,
Vol.11, 2001, pp. 548-554.
[64] Song, H., J. D. Tice, and R. F. Ismagilov, “A microfluidic system for controlling reaction
networks in time,”
Angew. Chem.
, Vol. 42, 2003, pp. 767-771.
[65] Tice, J.D., H. Song, A. D. Lyon, and R. F. Ismagilov, “Formation of droplets and mixing
in multiphase microfluidics at low values of the Reynolds and the Capillary numbers,”
Langmuir
, Vol. 19, 2003, pp. 9127-9133.
[66] Bringer, M.R., et al., “Microfluidic systems for chemical kinetics that rely on chaotic mix-
ing in droplets,”
Phil. Trans. R. Soc. Lond. A
, Vol. 362, 2004, pp. 1087-1104.
[67] Ottino, J.M.,
The Kinematics of Mixing: Stretching, Chaos, and Transport
, Cambridge
University Press, 1989.
[68] Stroock, A.D., et al., “Chaotic Mixer for Microchannels,”
Science
, Vol. 295, 2002, pp. 647-
650.
[69] Ganan-Calvo, A.M., et al., “Straightforward production of encoded microbeads by flow
focusing: potential applications for biomolecule detection,”
International Journal of Phar-
maceutics
, Vol. 324, 2006, pp. 19-26.
[70] Guillot, P., A. Colin, A. Ajdari, “Stability of a jet in confined pressure-driven biphasic
flows at low Reynolds number in various geometries,”
Phys. Rev. E
., Vol. 78, 2008,
p. 016307.
[71] Ward, T., et al., “Microfluidic flow focusing: drop size and scaling in pressure versus flow-
rate-driven pumping,”
Electrophoresis
, Vol. 26, 2005, pp. 3716-1724.
[72] Le Vot, S., J. Berthier, N. David, G. Costa, M. Alessio, V. Mourier, P.Y. Benhamou, and
F. Rivera, “Scaling rules for flow focusing devices: from standard to large FFDs for cell
encapsulation in alginates,”
Proceedings of the 2009 Transducers Conference
, Denver, CO,
June 21-25, 2009, p. 2003.
[73] Utada, A.S., A. Fernandez-Nieves, H.A. Stone, and D.A. Weitz, “Dripping to jetting transi-
tions in coflowing liquid streams,”
Phys. Rev. Letters
, Vol. 99, 2007, p. 094502.
[74] B. Ambravaneswaran, H.J. Subramani, S.D. Philipps, O.A. Basaran, “Dripping-jetting
transitions in a dripping faucet,”
Phys. Rev. Letters
, Vol. 93, No. 3, 2004, p. 034501-1.
[75] Husny, J., J.J. Cooper-White, “The effect of elasticity on drop creation in T-shaped micro-
channels,”
J. Non-Newtonian Fluid Mech
., Vol. 137, 2006, pp. 121-136.
[76] Choi, C.H., et al., “Generation of monodisperse alginate microbeads and in situ encapsula-
tion of cell in microfluidic device,”
Biomed Microdevices
, Vol. 9, 2007, pp. 855-862.
[77] Huang, K., T.H. Lai, and Y.C. Lin, “Manipulating the generation of Ca-Alginate micro-
spheres using microfluidic channels as a carrier of gold nanoparticules,”
Lab on a Chip
,
Vol. 6, 2006, pp. 954-957.
[78] Serra, C., et al., “A predictive approach of the influence of the operating parameters on
the size of polymer particles synthesized in a simplified microfluidic system,” Langmuir,
Vol. 23, 2007, pp. 7745-7750.
[79] Nie, Z., et al., “Emulsification in a microfluidic flow-focusing device: effect of the viscosi-
ties of the liquids,”
Microfluid Nanofluid,
, 2008, pp. 585-594.
[80] Garstecki, P., H. A. Stone, and George M. Whitesides, “Mechanism for flow-rate controlled
breakup in confined geometries: a route to monodisperse emulsions,”
Phys. Rev. Lett.
,
Vol. 94, 2005, pp. 164501-1-4.
[81] Stan, C.A., S.K.Y. Tang, G. Whitesides, “Independent control of drop size and velocity in
microfluidic flow-focusing generators using variable temperature and flow rate,”
Anal.
Chem.
, Vol. 81, 2009, pp. 2399-2402.
