Civil Engineering Reference
In-Depth Information
Maslehuddin M, Sharif AM, Shameem M, Ibrahim M, Barry MS (2003) Comparison of properties
of steel slag and crushed limestone aggregate concretes. Constr Build Mater 17(2):105-112
Metwally MEA, Seleem MH, Balaha MM, Abd El-Rahman H (2005) Utilizing of slag produced
from recycling of spent lead-batteries as concrete aggregate. Alex Eng J 44(6):883-892
Monshi A, Asgarani MK (1999) Producing Portland cement from iron and steel slags and
limestone. Cem Concr Res 29(9):1373-1377
Morrison C, Richardson D (2004) Re-use of zinc smelting furnace slag in concrete. Eng Sustain
157(4):213-218
Morrison C, Hooper R, Lardner K (2003) The use of ferro-silicate slag from ISF zinc production
as a sand replacement in concrete. Cem Concr Res 33(12):2085-2089
Mounanga P, Gbongbon W, Poullain P, Turcry P (2008) Proportioning and characterization of
lightweight concrete mixtures made with rigid polyurethane foam wastes. Cem Concr
Compos 30(9):806-814
Moura W, Masuero A, Dal Molin D, Vilela A (1999) Concrete performance with admixtures of
electrical steel slag and copper concerning mechanical properties. In: 2nd CANMET/ACI
international conference on high-performance concrete, SP-186 American Concrete Institute,
Farmington Hills, MI, pp 81-100
Naik TR, Singh SS, Huber CO, Brodersen BS (1996) Use of post-consumer waste plastics in
cement-based composites. Cem Concr Res 26(10):1489-1492
National Slag Association (2011) NSA product information: steel slag base and subbase aggregates,
PI 207. National Slag Association, 25 Stevens Avenue, Building A, West Lawn, PA 19609.
(
http://www.nationalslag.org/archive/sf_prod_info_sheet.pdf
.
Accessed January 2011)
Neville AM (1995) Properties of concrete, 4th edn. Longman, London
Ozkan O, Yuksel I, Muratoglu O (2007) Strength properties of concrete incorporating coal
bottom ash and granulated blast furnace slag. Waste Manage 27(2):161-167
Öztürk T, Bayrakl M (2005) The possibilities of using tobacco wastes in producing lightweight
concrete. Agricultural Engineering International: the CIGR E-Journal, Vol. VII, Manuscript
BC 05 006
Pacheco-Torgal F, Jalali S (2010) Reusing ceramic wastes in concrete. Constr Build Mater
24(5):832-838
Panyakapo P, Panyakapo M (2008) Reuse of thermosetting plastic waste for lightweight concrete.
Waste Manage (Oxf) 28(9):1581-1588
Papadakis VG (1999) Effect of fly ash on Portland cement systems Part I. Low-calcium fly ash.
Cem Concr Res 29(11):1727-1736
Papadakis VG (2000) Effect of fly ash on Portland cement systems Part II. High-calcium fly ash.
Cem Concr Res 30(10):1647-1654
Papayianni I, Anastasiou E (2010) Production of high-strength concrete using high volume of
industrial by-products. Constr Build Mater 24(8):1412-1417
Park SB, Jang YI, Lee J, Lee BJ (2009) An experimental study on the hazard assessment and
mechanical properties of porous concrete utilizing coal bottom ash coarse aggregate in Korea.
J Hazard Mater 166(1):348-355
Pellegrino C, Gaddo V (2009) Mechanical and durability characteristics of concrete containing
EAF slag as aggregate. Cem Concr Compos 31(9):663-671
Penpolcharoen M (2005) Utilization of secondary lead slag as construction material. Cem Concr
Res 35(6):1050-1055
Pereira DA, de Aguiar D, Castro F, Almeida MF, Labrincha JA (2000) Mechanical behaviour of
Portland cement mortars with incorporation of Al-containing salt slags. Cem Concr Res
30(7):1131-1138
Piercea CE, Blackwell MC (2003) Potential of scrap tire rubber as lightweight aggregate in
flowable fill. Waste Manage (Oxf) 23(3):197-208
Pofale AD, Deo SV (2010) Comparative long term study of concrete mix design procedure for
fine aggregate replacement with fly ash by minimum voids method and maximum density
method. KSCE J Civil Eng 14(5):759-764
