Biomedical Engineering Reference
In-Depth Information
Osman, E.A., Goss, J.R. 1982. Ash chemical composition, deformation and fusion temperatures
for wood and agricultural residues Paper no. 83 3549, American Society of Agricultural
Engineers, St. Joseph, MI.
Osman, N.B., 2010. Chemistry of hot-pressing hybrid poplar wood. PhD Dissertation. University
of Idaho, p. 140.
Otis, P.K., Tomroy, J.H., 1957. Density: a tool in silo research. Agric. Eng. 38, 806 807;
860 863.
Overend, R.P., 1982. Wood Gasification: Review of Recent Canadian Experience. National
Research Council of Canada, Ottawa, ON, Report no. 20094.
Overend, R.P., 2004. Thermo-chemical gasification technology and products. Presentation at
Global Climate and Energy Project, April, Stanford University.
Overmann, M., Gerber, S., Behrendt, F., 2008. Euler
Lagrange modelling of
wood gasification in fluidized beds. In: Werther, J., Nowak, W., Wirth, K., Hartge, E.
(Eds.), Circulating Fluidized Bed Technology, vol. 9. Tu-Tech Innovation GmbH, Hamburg,
pp. 733
Euler and Euler
738.
Paasen, S.V.B., 2004. Tar removal with wet ESP: parametric study. The Second World
Conference and Technology Exhibition on Biomass for Energy, Industry and Climate
Protection, pp. 205 215.
Pastorova, I., Arisz, P.W., Boon, J.J., 1993. Preservation of D -glucose oligosaccharides in cellu-
lose chars. Carbohyd. Res. 248, 151 165.
Peacocke, G.V.C., Bridgwater, A.V., 2001. Transport, handling and storage of biomass derived
fast pyrolysis liquid. In: Bridgwater, A.V. (Ed.), Progress in Thermochemical Biomass
Conversion, vol. 2. Blackwell Science, Oxford, pp. 1482 1499.
Peng, J.H., Bi, H.T., Sokhasanj, S., Lim, J.C., Melin, S., 2011. An economical and market
analysis of Canadian wood pellets. Int. J. Green Energ. 7 (2), 128 142.
Perry, R.H., Green, D.W., 1997. Perry's Chemical Engineer's Handbook, seventh ed. McGraw-Hill,
pp. 2-161 2-169.
Perry, R.H., Green, D.W., Maloney, J.O.
(Eds.), 1984. Chemical Engineer's Handbook.
McGraw-Hill.
Petersen, L., Werther, J., 2005. Experimental investigation and modeling of gasification of
sewage sludge in the circulating fluidized bed. Chem. Eng. Proc. 44 (7), 717 736.
Peterson, A.A., Vogel, F., Lachance, R.P., Froling, M., Antal, M.J., Tester, J.W., 2008.
Thermochemical biofuel production in hydrothermal media: a review of sub- and supercriti-
cal water technologies. Energ. Environ. Sci. 1, 32 65.
Pfeifer, C.M., Pourmodjib, M., Rauch, R., Hofbauer, H., 2005. Bed material and additive varia-
tions for a dual fluidized bed steam gasifier in laboratory, pilot and demonstration scale.
In: Cen, K. (Ed.), Circulating Fluidized Bed Technology VIII. International Academic
Publishers, pp. 482
489.
Phanphanich, M., Mani, A., 2011. Impact of torrefaction on the grindability and fuel characteris-
tics of forest biomass. Bioresour. Technol. 102, 1246 1253.
Pimchuai, A., Dutta, A., Basu, P., 2009. Torrefaction of agriculture residue to enhance combusti-
ble properties. Eighth World Conference in Chemical Engineering, Montreal, paper 1815.
Pimchuai, A., Dutta, A., Basu, P., 2010. Torrefaction of agriculture residue to enhance combusti-
ble properties. Energ. Fuels 24 (9), 4638 4645.
Piskorz, J., Scott, D.S., Radlien, D., 1988. Composition of oils obtained by fast pyrolysis of
different woods. In: Soltes, J., Milne, T.A. (Eds.), Pyrolysis Oils from Biomass: Producing,
Analyzing and Upgrading. American Chemical Society, pp. 167 178. (Chapter 16).
Power Magazine, 2012. July, p. 22.
 
 
 
Search WWH ::




Custom Search