Biomedical Engineering Reference
In-Depth Information
[36] Larson T, Davis J, Lam H, Cacia J. Use of process data to assess chromatographic perfor-
mance in production-scale protein purification columns. Biotechnol Prog 2003;19:485-492.
[37] Cooley R. Benefits of Process Analytical Technology (PAT) to optimization of Biotech
Manufacturing IFPAC—19th International Forum Process Analytical Technology, Arling-
ton, VA; 2005.
[38] Bonam D. Implementing PAT in Biopharmaceutical Processes: Issues and Concerns
IFPAC-2005 19th International Forum Process Analytical Technology, Arlington, VA; 2005.
[39] Rathore A, Yu M, Yeboah S, Sharma A. Case study and application of process analytical
technology (PAT) towards bioprocessing: use of on-line high performance liquid chroma-
tography (HPLC) for making real-time pooling decisions for process chromatography.
Biotechnol Bioeng 2008;100:306-316.
[40] Tang X, Pikal M. Design of freeze drying processes for pharmaceuticals: practical advice.
Pharm Res 2004;21(2):191-200.
[41] Frinke G, Boeckem M, Steiner M. Advantages of PAT-Technologies for Cycle Develop-
ment of Freeze Drying Processes, PDA Global PAT Conference, Bethesda, MD, May
22-23;2007.
[42] Milton N, Pyne A, Mishra D, Yu L. The exploration and use of thermal analytical techno-
logies during formulation process development of freeze dried products. Am Pharm Rev
2003;46-51.
[43] Connelly J, Welch J. Monitor lyophilizationwithmass spectrometer gas analysis. J Parenter
Sci Technol 1993;47(2):70-75.
[44] RoyM, PikalM. Process control infreezedrying: determinationof theendpoint of sublimation
drying by an electronic moisture sensor. J Parenter Sci Technol 1989;43(2);60-66.
[45] Genin N, Rene F, Corrieu G. A method for on-line determination of residual water content
and sublimation end-point during freeze-drying. Chem Eng Process 1996;35:255-263.
[46] Tang X, Nail S, Pikal M. Evaluation of manometric temperature measurement, a process
analytical technology tool for freeze-drying: part I, product temperature measurement.
AAPS PharmSciTech 2006;7(1):E1-E9.
[47] Tang X., Nail S, Pikal M. Evaluation of manometric temperature measurement, a process
analytical technology tool for freeze-drying: part II, measurement of dry-layer resistance.
AAPS PharmSciTech 2006;7(1):E1-E8.
[48] Tang X, Nail S, Pikal M. Evaluation of manometric temperature measurement, a process
analytical technology tool for freeze-drying: part III, heat and mass transfer measurement.
AAPS PharmSciTech 2006;7(1):E1-E7.
[49] Tang X, Nail S, Pikal M. Freeze-drying process design by manometric temperature
measurement: design of a smart freeze-dryer. Pharm Res 2005;22:685-700.
[50] Romero-Torres S, WikstromH, Grant E, Taylor L. Monitoring of mannitol phase behavior
during freeze-drying using non-invasive Raman spectroscopy. PDA J Pharm Sci Technol
2007;61:131-145.
[51] De Beer T, Allese M, Goethals F, Coppens A, Vander Heyden Y, Lopez De Diego H,
Rantanen J, Verpoort F, Vervaet C, Remon J, Baeyens W. Implementation of a process
analytical technology system in a freeze-drying process using Raman spectroscopy for
in-line process monitoring. Anal Chem 2007;79:7992-8003.
[52] Sukowski L, Ulmschneider M. In-line process analytical technology based on qualitative
near-infrared spectroscopy modeling. Pharm Ind 2005;67:830-835.
