Graphics Reference
In-Depth Information
The LCD Panel
When you get your Replicator 2 from the factory, a startup script will guide
you through initial setup and your first build. You should see the message
shown in Figure 6-1 on the LCD screen.
Figure 6-1. Welcome to the Replicator 2
If you don't see the startup script (or if you want to see it again), don't worry
—just use the up arrow and down arrow buttons to scroll through the menu
on the LCD panel. Select Utilities. Use the arrow buttons to scroll through the
options under Utilities. When you see Run Startup Script, select the M button
(in the center of the keypad) to select this option. You can return to the
Startup Script at any time by navigating through the menus on the LCD panel.
The LCD keypad is shown in Figure 6-2 . There are four arrow buttons sur-
rounding the M button. Use the buttons to navigate through the LCD menus
and make selections:
• The left arrow usually allows you to go back or cancel an action.
• A solid red M means the MakerBot Replicator 2 is working.
• A blinking red M means it's waiting for user input.
Figure 6-2. The LCD keypad
Follow the instructions in the LCD panel to set up your MakerBot Replicator
2 for the first time. If you have problems or questions, refer to “Troubleshoot-
ing” (page 72) or contact MakerBot Support.
Search WWH ::




Custom Search