Environmental Engineering Reference
In-Depth Information
154.
P. Sample, T. Meyer, and R. Smith, “Analysis, experimental results, and range
adaptation of magnetically coupled resonators for wireless power transfer,” IEEE
Transactions on Industrial Electronics , pp. 1-11, 2010.
155.
PowerMat Inc., http://www.powermat.com , accessed on May 20, 2010.
156.
C. Zhu, K. Liu, C. Yu, R. Ma, and H. Cheng, “Simulation and experimental
analysis on wireless energy transfer based on magnetic resonances,” IEEE Vehicle
Power and Propulsion Conference , pp. 1-4, 2008.
157.
Z.N. Low, R. Chinga, R. Tseng, and J. Lin, “Design and test of a high-power
high-efficiency loosely coupled planar wireless power transfer system,” IEEE
Transactions on Industrial Electronics , vol. 56, no. 5, pp. 1801-1812, 2009.
158.
J. Casanova, Z.N. Low, and J. Lin, “A loosely coupled planar wireless power
system for multiple receivers,” IEEE Transactions on Industrial Electronics , vol. 56,
no. 8, pp. 3060-3068, 2009.
159.
B. Jiang, J.R. Smith, M. Philipose, S. Roy, K. Sundara-Rajan, and A.V. Mami-
shev, “Energy scavenging for inductively coupled passive RFID systems,” IEEE
Transactions on Instrumentation and Measurement , vol. 56, no. 1, pp. 118-125, 2007.
160.
Y. Yang, D. Divan, R.G. Harley, and T.G. Habetler, “Power line sensornet—A
new concept for power grid monitoring,” IEEE Power Engineering Society General
Meeting , pp. 1-8, 2006.
161.
G.X. Wang, W.T. Liu, M. Sivaprakasam, and G.A. Kendir, “Design and analysis
of an adaptive transcutaneous power telemetry for biomedical implants,” IEEE
Transactions on Circuits and Systems I: Regular Papers , vol. 52, no. 10, pp. 2109-2117,
2005.
162.
J.T. Boys, G.A.J. Elliott, and G.A. Covic, “An appropriate magnetic coupling co-
efficient for the design and comparison of ICPT pickups,” IEEE Transactions on
Power Electronics , vol. 22, no. 1, pp. 333-335, 2007.
163.
A. Kurs, A. Karalis, R. Moffatt, J.D. Joannopoulos, P. Fisher, and M. Soljacic,
“Wireless power transfer via strongly coupled magnetic resonances,” Science
Magazine , vol. 317, no. 5834, pp. 83-86, 2007.
164.
D. Penly, “Induction,” http://facstaff.gpc.edu/dpenly/1112/Induct.pdf , ac-
cessed on May 19, 2010.
165.
S.M.
Kanbur,
“Induction
and
inductance,”
http://www.oswego.edu/
kanbur/phy313/Fard.pdf , accessed on May 19, 2010.
166.
Y.K. Tan and S.K. Panda, “A novel method of harvesting wind energy through
piezoelectric vibration for low-power autonomous sensors,” nanoPower Forum
(nPF'07) , 2007.
167.
S.C. Xie, “Inductive energy transfer system,” Bachelor's thesis, National Univer-
sity of Singapore, 2008.
168.
“Wireless power supply,” http://www.wirelesspowersupply.net/ , accessed on
May 26, 2010.
169.
D. Murphy, “Case-mate's hug wireless iPhone charging solution shipping now
for $100,” http://www.engadget.com/2010/03/09/case-mates-hug-wireless-
iphone-charging-solution-shipping-now-f/ , accessed on May 26, 2010.
170.
“Sony develops effective wireless power transmission up to 60W,”
http://www.mydigitallife.info/2009/10/03/sony-develops-effective-wireless-
power-transmission-up-to-60w/comment-page-1/ ,
accessed
on
May
26,
2010.
Search WWH ::




Custom Search