References - Energy Harvesting Autonomous Sensor Systems - page 221

69. K. Khouzam and L. Khouzam, “Optimum matching of direct-coupled electrome-

chanical loads to a photovoltaic generator,” IEEE Transactions on Energy Conver-
sion , vol. 8, no. 3, pp. 343-349, 1993.

70. T. Paing, J. Shin, R. Zane and Z. Popovic, “Resistor emulation approach to low-

power RF energy harvesting,” IEEE Transaction on Power Electronics , vol. 23, no.
3, pp. 1494-1501, 2008.

71. R.W. Erickson and D. Maksimovic, Fundamentals of Power Electronics , 2nd ed.,

Springer, New York, pp. 637-663, 2001.

72. J. Twidell and A. Weir, Renewable Energy Resources , 2nd ed., Taylor & Francis,

London, 2006.

73. The Bor Forest Island Fire Experiment Fire Research Campaign Asia-North

(FIRESCAN), IV. Bor Forest Island Fire Behavior and Atmospheric Emissions ,
http://www.fire.uni-freiburg.de/other _ rep/research/rus/rus _ re _ 1bor.htm ,
accessed on July 1, 2010.

74. V. Salas, E. Olias, A. Barrado, and A. Lazaro, “Review of the maximum power

point tracking algorithms for stand-alone photovoltaic systems,” Solar Energy
Materials and Solar Cells , vol. 90, no. 11, pp. 1555-1578, 2006.

75. M. Mitchell, “Animated demonstration of Bernoulli's principle,” http://home.

earthlink.net/mmc1919/venturi.html , accessed on July 1, 2010.

76. S.J. I'Anson, “Radius of curvature,” University of Manchester, http://pygarg.ps.

umist.ac.uk/ianson/paper _ physics/Radius _ of _ Curvature.html , accessed on

July 1, 2010.

77. N.G. Elvin and A.A. Elvin, “A general equivalent circuit model for piezoelectric

generators,” Journal of Intelligent Material Systems and Structures , vol. 20, no. 1,
pp. 3-9, 2009.

78. J.G. Smits, S.I. Dalke, and T.K. Cooney, “The constituent equations of piezoelec-

tric bimorphs,” Sensors and Actuators , vol. A28, no. 1, pp. 41-61, 1991.

79. J.L. Gonzalez, A. Rubio, and F. Moll, “Human powered piezoelectric batteries to

supply power of wearables electronic devices,” International Journal of the Society
of Materials Engineering for Resources , vol. 10, no. 1, pp. 34-40, 2002.

80. Q.-M. Wang, X. Du, B. Xu, and L.E. Cross, “Theoretical analysis of the sensor

effect of cantilever piezoelectric benders,” Journal of Applied Physics , vol. 85, no.
3, pp. 1702-1712, 1999.

81. J. Kymissis, C. Kendall, J. Paradiso, and N. Gershenfeld, “Parasitic power

harvesting in shoes,” 2nd International Symposium on Wearable Computers ,

pp. 132-139, 1998.

82. V.C. Gungor and G.P. Hancke, “Industrial wireless sensor networks: challenges,

design principles, and technical approaches,” IEEE Transactions on Industrial Elec-
tronics , vol. 56, no. 10, pp. 4258-4265, 2009.

83. C. Alippi, G. Anastasi, M. Di Francesco, and M. Roveri, “Energy management

in wireless sensor networks with energy-hungry sensors,” IEEE Transactions on
Instrumentation and Measurement Magazine , vol. 12, no. 2, pp. 16-23, 2009.

84. D.M. Rowe, Thermoelectrics Handbook: Macro to Nano , CRC Press, Taylor & Francis,

Boca Raton, FL, 2006.

85. J. Carmo, L. Goncalves, and H. Correia, “Thermoelectric micro converter for

energy harvesting systems,” IEEE Transaction on Industrial Electronics , vol. 57,
no. 3, pp. 861-867, 2009.

86. W. Glatz, S. Muntwyler, and C. Hierold, “Optimization and fabrication of thick

flexible polymer based micro thermoelectric generator,” Sensors and Actuators A:
Physical , vol. 132, pp. 337-345, 2006.