Civil Engineering Reference
In-Depth Information
6.
Badrinarayanan, S., Zabaras, N., Sensitivity analysis for the optimal design of forming processes,
Comp. Meth. Appl. Mech. Eng.,
129:4:319, Feb. 1996.
7.
Bathe, K.J.,
Finite element procedures,
Prentice Hall, Inc., Englewood Cliffs, New Jersey, 1996.
8.
Beckers, M., and Kopp, R.,
A new approach to optimization of metal forming processes,
Thompson
et al. (editors), Numiform 89, 107-113, Balkema, 1989.
9.
Bohatier, C., and Chenot, J.L., Finite element formulation for non-steady state large viscoplastic
deformation,
Int. J. Num. Meth. Eng.,
21:1697, 1985.
10.
Brezzi, F.,
On the existence, uniqueness and approximation of saddle point problems arising from
lagrangian multipliers,
R.A.I.R.O., 8
ième
année, R.2 p. 129, 1974.
11.
Chamouard, A., Statique et dynamique appliquée au déformations à chaud,
Estampage & Froge,
vol. 1 and 2, Dunod editor, 1966. (in French)
12.
Chenot, J.L., Coupez, T., and Fourment , L., Recent progresses in finite element simulation of the
forging process, Computational Plasticity-Fundamental and Applications, Proceedings of the Fourth
International Conference, Barcelona, 3-6 avril, p. 1321, D.R.J. Owen et al. éditeurs, Pineridge Press,
Swansea, UK, 1995.
13.
Chen, M.F and Maniatty, A.M., An inverse technique for the optimization of some forming
processes, Proceedings of the 5
th
International conference on Numerical Methods in Industrial
Forming Processes, 18-21 June, Ithaca, New York, Balkema, Rotterdam, 545, 1995.
14.
Chenot, J.L., Massoni, E., Fourment, L., Inverse problems in finite element simulation of metal
forming processes, Engineering Computations, vol. 13, n°2/3/4, p.190, 1996.
15.
Chenot, J.L., Coupez, T., Fourment, L., and Ducloux, R., 3-D finite element simulation of the
forging process: scientific developments and industrial applications, Advanced Technology of Plas-
ticity 1996, T. Altan editor, Proceedings of the 5
th
International Conference on Technology of
Plasticity, October 7-11, Colombus, 465, 1996.
16.
Choi, S.H. and Dean, T.A., Computer aided design of die block layout,
Int. J. Mach. Tools Manufact.,
27(1): 91, 1987
17.
Chu, K. and Lee, D., Computer aided analysis of sheet metal forming processes, Proceedings of
the First International Conference on Technology of Plasticity, published by the Japan Society for
Technology of Plasticity and the Japan Society of Precision Engineering, Tokyo, 1: 660, 1984.
18.
Coupez, T. and Chenot, J.L., Large deformations and automatic remeshing, Computational Plas-
ticity, Pineridge Press, edited by Owen, Oñate, Hinton, Pineridge Press, Swansea, 1077, 1992.
19.
Cox, M.G., The numerical evaluation of B-splines, National Physical Laboratory DNAV, August
1971.
20.
Dennis, J.E. and Schnabel, R.B.,
Numerical methods for unconstrained optimization and non linear
equations,
Prentice-Hall, Englewood Cliffs, New Jersey, 1983.
21.
Duggirala, R., Shivpuri, R., Kini, S., Ghosh, S., and Roy, S., Computer Aided Approach for Design and
Optimization of Cold Forging Sequences for Automotive Parts,
J. of Mater. Proc. Technol.
46:185, 1994.
22.
Espiga, F., Jugo, A., and Anza, J.J., Industrial application of the numerical simulation to the design
and optimization of forging processes,
J. Mater. Process. Technol.,
45: 81, 1994.
23.
Felder, E., The wear of hot working tools. Application to forging and rolling of steel, The tribological
design of machines and elements, D. Dowson et al. (editors), Trib. Series 14, Elsevier, 253, 1989.
24.
Fonseca, C.M. and Fleming, P.J., Genetic algorithms for multiobjective optimization : formulation,
discussion and generalization, Proc. Of the Fifth Int. Conf. On Genetic Algorithms, Morgan-
Kauffman (editors), 416, 1993.
25.
Fourment, L., Chenot, J.L., The inverse problem of design in forging, Inverse Problems in Engi-
neering Mechanics, Balkema, Rotterdam, 21, 1994.
26.
Fourment, L., Balan, T., and Chenot, J.L. Shape optimal design in forging, Proceedings of the 5
th
International conference on Numerical Methods in Industrial Forming Processes, 18-21 June,
Ithaca, New York, Balkema, Rotterdam, 557, 1995.
27.
Fourment, L., Miles, M.P., Chenot J.L., Incremental mass conservation and adaptive remeshing for
the thermo-mechanical coupling between workpiece and tools in nonsteady-state metal forming,
