Civil Engineering Reference
In-Depth Information
9. Balendra, R., Pressure to effect injection forming,
Int. J. Adv. Manufact. Eng.,
2:32, 1990.
10. Balendra, R., Injection-chamber to die-cavity interface for Injection forming,
Int. J. Mach. Tools
Manufact.,
33:6:753, 1993.
11. Balendra, R. and Qin, Y., FE simulation of the development of flaws during Injection Forging,
Int.
J. of Mach. Tools Manfact.,
34:8:1091, 1984.
12. Balendra, R. and Qin, Y., Material-flow considerations for the design of Injection Forging,
Trans-
action of ASME, Journal of Manufacturing Science and Engineering,
119:350, 1997.
13. Kudo, H. and Shinozaki, K., Investigation into multiaxial extrusion process to form branched parts,
Proc. of the Int. Conf. Prod. Eng.,
Tokyo, Part I, p. 314, 1974.
14. Osen, W. and Lange, K., Deformation pattern, forces and process limits in combined radial and
backward can extrusion,
Steel Research,
56:4:211, 1985.
15. Osen, W., Possibilities and limitations of cold extrusion processes combined with radial extrusion,
Advanced Technology of Plasticity,
1:575, 1986.
16. Krusic, V. and Kuzman, K., Cold radial extrusion in automotive industry, 26th ICFG Plenary
Meeting, Osaka, 1993.
17. Arentoft, M., Petersen S. B., Rodriques, J. M. C., Martins, P. A. F., Balendra, R. and Wanheim, T.,
Review of the research on the Injection Forging of tubular materials,
J. Mater. Processing Technol
.
,
52:2-4:460, 1995.
18. Henry, J. C. and Watkins, M. T., The production of hollow flanged components from bar stock by
upsetting and extrusion, NEL Report 628, UK, 1977.
19. Okafor, A. C. and Balendra, R., Stress and energy distributions in injection forming of a complex
shaped component, Proc. 7th Int. Cold Forging Congress, 24-26th, April, Birmingham, UK, p. 79,
1985.
20. Ralendra, R., Colla, D. and Petersen, S.B., Simulation of preform design for injection forging of
tubes, Proc. of the 11th NCMR, Leicester, U.K, p. 82, 1995.
21. Ralendra, R., Petersen, S. B. and Colla, D., Preforming considerations for the injection forging of
tubes, IMechE Conference Transaction 1995-3, p. 79, 1995.
22. Pipan, J., Radial extrusion combined with inside ironing of tube, UMFORMTECHNIK, 27/4, p.
262, 1993.
23. Filho, L. A. M. and Al-Qureshi, H. A., Unconventional tee forming on metal tubes,
Trans. ASME,
J. Engg. Ind
., 107:392, 1985.
24. Thiruvarudchelvan, S., Elastomers in metal forming: a review,
J. of Mater. Process. Technol.,
39:55,
1993.
25. Qin, Y. and Balendra, R., Simulation of the forming sequence of pressure-assisted Injection Forging
of thick-walled tubes, TRANSACTIONS of NAMRI/SME, Vol. XXIII, p. 27, 1995.
26. Qin, Y. and Balendra, R., Technical evaluation of pressure-assisted Injection Forging of thick-walled
tubes,
Advances in Manufact. Technol.
IX, Taylor & Francis, London, p. 62, 1995.
27. Balendra, R. and Qin, Y., Feasibility and technical limitation of pressure-assisted Injection Forging
of thick-walled tubes, Proc. of 5th ICTP in Ohio, 7-10th October, USA, p. 327, 1996.
28. Geiger, R., From near-net-shape to net-shape cold forging—State of the art, Proc. of the 9th Cold
Forging Congress, 22-26 May, UK, p. 59, 1995.
29. Nakano, T., Modern applications of complex forging and multi-action forming in cold forging,
J.
of
Mater. Process. Technol.,
46:201, 1994.
30. Lange, K.,
Handbook of metal forming,
Mcgraw-Hill, New York, 1985.
31. Keller, J., Optimierung der fertigungsfolge kaltmassivumformen und spanen,
Neu. Entwichlungen
in der Massivumformung,
p. 8/1, 1989.
32. Dean, T. A., Progress in net-shape forging,
Adv. Techol. of Plasticity,
2:1031, 1993.
33. Plancak, M., Bramley A., and Osman F., Non-conventional cold extrusion,
J. of Mater. Process.
Technol.,
34:465, 1992.
34. Shinozaki, K., Further investigation of cold lateral extrusion to form staggered branches from a
cylindrical billet,
Annals of the CIRP
Vol.38/1/1989, p. 253, 1989.
