Environmental Engineering Reference
In-Depth Information
[175]
Ren, J., O. Urukawa, and K. Adachi (2003).
Dielectric and viscoelastic studies of
segmental and normal mode relaxations in undiluted poly (d,l-lactic acid),
Macromolecules 36:210-219.
[176]
Dorgan, J. R., J. Janzen, S. B. Hait, and D. K. Knauss (2005
). Fundamental solution
and single chain properties of polylactides
, J. Polym. Sci., Part B: Polym Phys. 43:3
100- 3111.
[177]
Blomqvist, J. (2001).
RIS Metropolis Monte Carlo studies of poly[L-lactic), poly(L,D-
lactic) and polyglycolic acids,
Polymer 42:3515-3521.
[178]
Biresaw, G., and C. J. Carriere (2002).
Interfacial tension of poly(lactic
acid)/polystyrene blends
, J. Polym. Sci., Part B: Polym Phys 40:2248-225 8.
[179]
Cooper-White, J. J., and M. E. Mackay (1999).
Rheological properties of poly(lactides).
Effect of molecular weight and temperature on the viscoelasticity of poly(l-lactic acid),
J. Polym. Sci., Part B: Polym Phys 37:1803-1814.
[180]
Dorgan, J. R., and J. S. Williams (1999).
Melt rheology of poly(lactic acid):
Entanglement and chain architecture effects
, Journal of Rheology 43(5):1 141-1155.
[181]
Lehermeier, H. J., and J. R. Dorgan (2001).
Melt rheology of poly(lactic acid):
Consequences of blending chain architectures,
Polymer and Engineering Science
41(12):2172-2184.
[182]
Palade, L. I., H. J. Lehermeier, and J. R. Dorgan (2001).
Melt rheology of high-L
content poly (lactic acid),
Macromolecules 34(5): 1384-1390.
[183]
Dorgan, J. R., J. Janzen, M. P. Clayton, D. M. Knauss, and S. B. Hait (2005).
Melt
Rheology of Variable L-content Poly (lactic acid),
Journal of Rheology 49(3): 607-619.
[184]
Lehermeier, H. J. Poly (lactic acid): An environmentally benign polymer derived from
corn: Rheological and permeation properties. M. S., Colorado School of Mines, Golden,
Colorado, 2000.
[185]
Leenslag, J. W. G., S., and A. J. Pennings (1984). Resorbable materials of poly(L-
lactide). V.
Influence of secondary structure on the mechanical properties and
hydrolyzability of poly(L-lactide) fibers produced by a dry-spinning method
, J Appl
Polym Sci 29:2829-2842.
[186]
Leenslag, J. W., and A. J. Pennings (1987).
High-strength fibers by hot drawing of as-
polymerized poly(L-lactide)
, Polymer Communications 28 (April):92-94.
[187]
Fambri, L. P., A., R. Fenner, S. D. Incardona, and C. Migliaresi (1997).
Biodegradable
fibres of poly(L-lactic acid) produced by melt spinning,
Polymer 38(1):79-85.
[188]
Incardona, S. D. F., L., and C. Migliaresi (1996).
Poly-L-lactic acid braided fibres
produced by melt spinning: characterization and in vitro degradation
, J Mater Sci
Mater Med 7:387-391
[189]
Schmack, G. T., B., R. Vogel, R. Beyreuther, S. Jacobsen, and H. G. Fritz (1999).
Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin
drawing
, J Appl Polym Sci 73:2785-2797.
[190]
Mezghani, K. S., and J.E. (1998).
High speed melt spinning of poly(L-lactic acid)
filaments,
J Polym Sci Part B: Polym Phys 36:1005-1012.
[191]
Hoogsteen, W., A. R. Postema, and A. J. Pennings (1990).
Crystal structure,
conformation, and morphology of solution-spun poly(L-lactide) fibers,
Macromolecules
23(2):634-642.