Hardware Reference
In-Depth Information
One of the added features on these boards is labeled P6. It's easy to miss. P6 is just
two small holes on the opposite side of the board from the GPIO, near the HDMI port
(see Figure 1-12 ).
Figure 1-12.
P6 holes
If you solder a pair of header pins into these two holes (see “Soldering Reminders” on
page 42 if you're new to soldering), you have a reset switch, as shown in Figure 1-13 .
Just use a metal object to connect the two pins and short them.
Search WWH ::




Custom Search