Civil Engineering Reference
In-Depth Information
25.
Riesen, R., and Bartels, W., Rapid Quantitative Characterization of Elastomers
by Dynamic Load Thermomechanical Analysis, in:
Proc. 7th Int. Conf. on
Thermal Analysis,
2:1050-1056, John Wiley & Sons, NY (1982)
26.
Squire, R., Chemical Changes in Roof Membranes and Building Sealants
Building Research Establishment Occasional Paper, OP 60, pp. 29-48,
Bldg. Res. Establishment, Garston, UK (1995)
27.
Rama Rao, M., and Radhakrishnan, T. S., Thermal Degradation of Liquid
Polysulfide Polymers: Pyrolisis-GC-MS and Thermogravimetry Studies,
J.
Appl. Polymer Sci.,
30:855-873 (1985)
28.
Radhakrishnan, T. S., and Rama Rao, M., Kinetics and Mechanism of the
Thermal Degradation of Polysulfide Polymer Cured with Ammonium
Dichromate/Pyrolysis-Gas Chromatography and Thermogravimetric
Studies,
J. Anal. Appl. Pyrolysis,
9:309-322 (1986)
29.
Boettger, T., and Bolte, H., Results from the University of Leipzig Project
Concerning the Long-Term Stability of Elastomeric Building Sealants, in
Science and Technology of Building Seals, Sealants, Glazing, and
Waterproofing,
(J. M. Klosowski, ed.), 7:66-80, ASTM STP 1334, ASTM,
West Conshohocken, PA (1998)
30.
Feldman, D., and Lacasse, M. A., Morphology of Lignin-polyurethane
Blends,
Mater. Res. Soc. Symp. Proc.,
153:193-198 (1989)
31.
Rohn, C. L., Flow Behavior of Holt Melt Adhesives,
Thermal Trends,
3(1):18 (Winter 1996)
32.
Brummer, R., Hetzel, F., Harder, C., and Germany, H., Correlation of
Polymer Properties with Dynamic Mechanical Measurements,
Appl.
Rheology,
7(4):173-178 (1997)
33.
Foster, B. W., and Barrret, A. E., Characterizing Hot-tack Difference in
Hot-melt Adhesives Using DTMA,
Tappi Journal,
74(9):135-138 (1991)
34.
Onic, L., Bucur, V., Ansell, M. P., Pizzi, A., Deglise, X., and Merlin, A.,
Dynamic Thermomechanical Analysis as a Control Technique for Thermoset
Bonding of Wood Joints,
J. Int. Adhesion & Adhesives,
18:89-94 (1998)
35.
Brinson, H. F., Dickie, R. A., and Debolt, M. A., Measurement of Adhesive
Bond Properties Including Damage by Dynamic Thermal Analysis of a
Beam Specimen,
J. Adhesion,
55:17-30 (1995)
36.
Tabaddor, P. L., Aloisio, C. J., Bair, H. E., Plagianis, C. H., and Taylor, C.
R., Thermal Analysis Characterization of a Commercial Thermoplastic/
Thermoset Adhesive,
J. Thermal Anal. Calorimetry,
59:559-570 (2000)
37.
Ludbrook, B. D., and Whitwood, R. J., The Use of Thermal Analysis to
Investigate the Cure of Reactive Adhesives,
Int. J. Adhesion Adhesives,
12(3):138-144 (1992)
