Flexural Strengthening of Beams and Slabs - Strengthening Design of Reinforced Concrete with FRP - page 150

ACI 440.2R-08. 2008. Guide for the design and construction of externally bonded FRP sys-
tems for strengthening concrete structures. ACI Committee 440, Farmington Hills, MI.
Alkhrdaji, T., A. Nanni, and R. Mayo. 2000. Upgrading Missouri transportation infrastruc-
ture: Solid RC decks strengthened with FRP systems. Transportation Research Record
1740:157-69.
Al-Tamimi, A. K., R. Hawileh, J. Abdalla, and H. A. Rasheed. 2011. Effects of ratio of CFRP
plate length to shear span and end anchorage on flexural behavior of SCC R/C beams.
Journal of Composites for Construction 15 (6): 908-19.
Arduini, M., A. Tommaso, and A. Nanni. 1997. Brittle failure in FRP plate and sheet bonded
beams. ACI Structural Journal 94 (4): 363-70.
Chaallal, O., M.-J. Nollet, and D. Perraton. 1998. Strengthening of reinforced concrete beams
with externally bonded fiber-reinforced plastic plates: Design guidelines for shear and
flexure. Canadian Journal of Civil Engineering 25:692-704.
Decker, B. R. 2007. A method of strengthening monitored deficient bridges. M.S. thesis,
Kansas State Univ., Manhattan, KS.
El-Mihilmy, M., and J. Tedesco. 2001. Prediction of anchorage failure for reinforced con-
crete beams strengthened with fiber-reinforced polymer plates. ACI Structural Journal
98 (3): 301-14.
Fanning, P., and O. Kelly. 2001. Ultimate response of RC beams strengthened with CFRP
plates. Journal of Composites for Construction 5 (2): 122-27.
FIB Task Group 9.3 FRP. 2001. Externally bonded FRP reinforcement for RC structures.
Technical report committee 9.3, Federation Internationale Du Beton.
GangaRao, H. V. S., and P. V. Vijay. 1998. Bending behavior of concrete beams wrapped with
carbon fabric. ASCE Journal of Structural Engineering 124 (1): 3-10.
Holzenkämpfer, O. 1994. Ingenieurmodelle des Verbundes geklebter Bewehrung für
Betonbauteile. PhD diss.
Malek, A., H. Saadatmanesh, and M. Ehsani. 1998. Prediction of failure load of R/C beams
strengthened with FRP plate due to stress concentration at the plate end. ACI Structural
Journal 95 (2): 142-52.
Meier U. 1987. Repair of bridges with high performance composite materials. Material und
Technik 15 (4): 125-28.
Neubauer, U., and F. S. Rostasy. 1997. Design aspects of concrete structures strengthened
with externally bonded CFRP-plates. In Proceedings of The Seventh International
Conference on Structural Faults and Repair , ed. M. C. Forde. Vol. 2, Concrete and
composites, 109-18. Edinburgh, Scotland.
Okeil, A. M., Y. Bingol, and T. Alkhrdaji. 2007. Analyzing model uncertainties for concrete
beams flexurally strengthened with FRP laminates. In Proceedings of the Transportation
Research Board 86th Annual Meeting , Jan. 21-25, 2007, Washington, DC.
Quantrill, R., L. Hollaway, and A. Thorne. 1996. Predictions of the maximum plate end
stresses of FRP strengthened beams: Part II. Mag. Concrete Res. 48 (177): 343-51.
Rasheed, H. A., R. R. Harrison, R. J. Peterman, and T. Alkhrdaji. 2010. Ductile strengthen-
ing using externally bonded and near surface mounted composite systems. Composite
Structures 92 (10): 2379-90.
Rasheed, H. A., K. H. Larson, and S. Nayyeri Amiri. 2013. Analytical solution of interface
shear stresses in FRP strengthened concrete beams. ASCE Journal of Engineering
Mechanics 139 (1): 18-28.
Rasheed, H. A., K. H. Larson, and R. J. Peterman. 2006. Analysis and design procedure for
FRP-strengthened prestressed concrete T-girders considering strength and fatigue.
Journal of Composites for Construction 10 (5): 419-32.
Rasheed, H. A., and N. H. Motto. 2010. Strength design equations for FRP strengthened con-
crete beams. Australian Journal of Structural Engineering 11 (2): 103-16.