Graphics Reference
In-Depth Information
Figure 7-84
Settings for the smoke domain
5.
Turn your attention to the particle system on the Flow object. Under Velocity, set the Normal value to
3 to make the particles leave the object with a velocity in the direction of the plane's normals. Also, set
the Emission Number to around 50,000. Convincing flame requires fairly dense particle systems, or else
the particles will be visible individually at the base of the flame (even at 50,000 particles, this is hard to
avoid, but it can be concealed in a variety of ways). The particle settings are shown in
Figure 7-85
.
6.
Set up the volumetric material as shown in
Figure 7-86
.
